DREAMSCAPE

1 snowboard binding disc + 4 16" screws mm

7.90
Pay with
Be the first to write a review
Ref. : 8576658

This spare part is designed to avoid throwing away your snowboard binding because of a broken or lost part (see compatibility in the specifications).

The length of the screws is adapted to the thickness of the disc, so the SAV disc + screw set is only suitable for Decathlon Wedze snowboard bindings.

In-store collection

PRODUCT BENEFITS

Capacity

1 disk + 4 screws 16 mm + 4 washers

Compatibility

Only with Decathlon fasteners. See specifications for details.

Corrosion resistance

The screws are made of stainless steel.

Easy assembly/disassembly

Phillips screwdriver, ideally PZ3 or PH3.

TECHNICAL INFORMATION

Description

_ 1 disc compatible on your board with: 4x4 inserts and Burton's "Chanel" system,
_ 4 x 16 mm screws mm
_ 4 washers.
WARNING: for Burton's Chanel system, check the length of the screws carefully = the screws must not protrude beyond the Burton insert when fully screwed onto the disc + washer.
If they do,
_ you can irreversibly damage the sole of your board.
_ using 2 washers can be a solution. To be checked on each board.

Mounting compatibility

Compatible with all Decathlon / Wed'ze bindings, even if your original disc is different.
ATTENTION: The disc is only compatible with Decathlon / Wed'ze bindings.
Indeed, the diameter of the disc, the size or distribution of the notches, ... vary depending on the brand.
External diameter of the disc: 99 mm / Internal diameter of the disc: 88 mm / thickness 10 mm.
1 notch = 3° angle.

Board compatibility

This disc allows Decathlon bindings (Wedze or Dreamscape) to be mounted on all
boards _ inserts 4x4
_ inserts 4x2
_ Burton Channel with the outermost 2x3 holes

Why is there only one disc and not a pair of discs?

This repair kit is intended for use in the event of lost screws or broken discs. It's rare to break both discs at the same time, or to lose more than 4 screws.
This kit is designed to keep the cost of repair to a minimum.

Tools required

a PZ3 screwdriver for the 4 fixing screws

Compatibility with Burton Channel boards

The Burton snowboard brand has its own system for mounting bindings: the Channel. The binding is screwed onto 2 mobile inserts, which are present when the board is purchased.
Our disc allows this binding to be mounted on the channel, as the holes make this possible.
However, the screws supplied with our discs are not compatible in diameter. The Burton insert is also different from the rest of the market. You'll need to buy Burton screws.

Warranty

5 years

COMPOSITIONS / ADVICE

Composition

Metal structure 50% Polyamide, 50% Stainless steel

USER REVIEWS

Questions & answers

See also