Description
_ 1 disc compatible on your board with: 4x4 inserts and Burton's "Chanel" system,
_ 4 x 16 mm screws mm
_ 4 washers.
WARNING: for Burton's Chanel system, check the length of the screws carefully = the screws must not protrude beyond the Burton insert when fully screwed onto the disc + washer.
If they do,
_ you can irreversibly damage the sole of your board.
_ using 2 washers can be a solution. To be checked on each board.
Mounting compatibility
Compatible with all Decathlon / Wed'ze bindings, even if your original disc is different.
ATTENTION: The disc is only compatible with Decathlon / Wed'ze bindings.
Indeed, the diameter of the disc, the size or distribution of the notches, ... vary according to the brand.
External diameter of the disc: 99 mm / Internal diameter of the disc: 88 mm / thickness 10 mm.
1 notch = 3° angle.
Board compatibility
This disc allows Decathlon bindings (Wedze or Dreamscape) to be mounted on all
boards _ inserts 4x4
_ inserts 4x2
_ Burton Channel with the outermost 2x3 holes
Why is there only one disc and not a pair of discs?
This repair kit is intended for use in the event of lost screws or broken discs. It's rare to break both discs at the same time, or to lose more than 4 screws.
This kit is designed to keep the cost of repair to a minimum.
Tools required
a PZ3 screwdriver for the 4 fixing screws
Compatibility with Burton Channel boards
The Burton snowboard brand has its own binding mounting system: the Channel. The binding is screwed onto 2 mobile inserts, which are present when the board is purchased.
Our discs allow this binding to be mounted on the channel, as the holes make this possible.
However, the screws supplied with our discs are not compatible in diameter. The Burton insert is also different from the rest of the market. You'll need to buy Burton screws.
