KIPSTA

FANS BALL JUPILER PRO LEAGUE MULTILOGOS CLUBS soccer ball

23.90
Pay with
Be the first to write a review
Ref. : 8775632

We've designed this FANS BALL PRO LEAGUE ball for young footballers who are just starting out or who play occasionally.

Experience the emotions of soccer like your idols, and share the pleasure of a shaking net or a resonating post. Live soccer the way you like it - that's all that matters.

Color : ultra white

5

In-store collection

PRODUCT BENEFITS

Resistance

PVC outer casing for extra strength.

Pressure resistance

Optimized bladder for good air retention.

Impact reduction

Hardness of a standard soccer.

Rebound quality

Ball meeting international soccer requirements in terms of rebound.

TECHNICAL INFORMATION

KIPSTASUPPLIER OF THE OFFICIAL PRO LEAGUE BALL FOR THE 2023-2027 CYCLE

Kipstathe DECATHLON soccer brand, becomes the official ball partner of the Pro League from the 2023-2024 season.
DECATHLON and the PRO LEAGUE have signed a 5-season agreement for the Jupiler Pro League, the 1B Pro League, the Croky Cup and the Supercup.
All matches in these competitions are played with the Kipsta match ball.
DECATHLON also becomes a structural partner of the Pro League's Football & Community activities.

Too light? Too heavy? The weight is standardized...

Here's the weight of your ball:
Between 410 and 450 grams (size 5).

What size, what circumference?

Here's the circumference of your ball:
Between 68.0 and 70.0 cm (size 5).

A round ball, really?

Variation of the measured average: maximum 2%.
We measure the sphericity of the ball at 4,500 different points and look at the deviations observed.
If the deviation exceeds 2% (FIFA standard), our engineers are tasked with improving the sphericity to guarantee a regular rebound.

Maximum pressure loss test: we tell you...

We inflate the balloon to the recommended pressure (i.e. 0.8 bar).
72 hours later, the balloon should have lost no more than 15% of its pressure, i.e. around 0.1 bar. The pressure after 72 hours should therefore be around 0.7 bar.
This also means that it's perfectly normal for a balloon to lose pressure after a few days.

We also tested the balloon's water absorption ...

In the laboratory, we simulate playing conditions in the rain by soaking the ball in 2 cm of water on a pivoting support while applying 250 compressions. At the end of the test, the ball should have gained no more than 15% of its weight, i.e. around 65 grams for this size 5 ball.

When the rebound goes, everything goes

Between 125 and 155 cm (size 5) with a maximum difference of 10 cm between the highest and lowest bounce per ball. Each ball is released 10 times onto a steel plate from a height of 2 meters.

Not bad at all!

The most demanding test we put this ball through is the machine shoot test.
The ball must withstand 2,500 shots against an inclined concrete surface at 50km/h from a distance of 2.5m.
At the end of this test, we check:
-the general condition of the ball: the seams must withstand this test.
-the circumference: it must not have increased by more than 1.5cm.the circumference: it must not have increased by more than 1.5cm.
-the sphericity: it must not have varied by more than 2%.
-the pressure: the ball must not have lost more than 15%.

And what do you think?

Your opinions are essential, and help us to continually improve our products.
Many thanks in advance for sharing your experiences.

Warranty

2 years

COMPOSITIONS / ADVICE

Composition

Outer shell 100% Polyvinyl chloride Bladder 100% Dry rubber Main lining 100% Polyester

STOCK TIPS

After use, store in a dry, well-ventilated place.

Restrictions

Not suitable for use on asphalt.

TESTS

Complies with the requirements of international federations.

Maintenance tips

No washing

No bleaching

No tumble drying

No ironing

No dry cleaning

USER REVIEWS

Questions & answers

See also