KIPSTA

SOCCER BALL ITALY SIZE 5 2024

8.40
Pay with
Ref. : 8668622

Designed for footballers who want to play occasionally with a ball in the colors of their country or favorite team.

Our design teams have focused on the strength of its outer component and the quality of its rebound to accompany your frenzied games.

5

In-store collection

PRODUCT BENEFITS

Resistance

Withstands 2,500 shots against an inclined plane at 50km/h (laboratory tested)

Rebound quality

32 panels with 2 layers of lamination combined with a butyl and latex bladder.

Pressure resistance

Latex bladder.

IMAGES

BALLON DE FOOTBALL ITALIE TAILLE 5 2024
BALLON DE FOOTBALL ITALIE TAILLE 5 2024
BALLON DE FOOTBALL ITALIE TAILLE 5 2024
BALLON DE FOOTBALL ITALIE TAILLE 5 2024

TECHNICAL INFORMATION

Design

To ensure that your balloon can withstand all your demands, we have put it through a series of laboratory tests to guarantee its quality.

Circumference

Between 68.5 and 69.5 cm (size 5)

Sphericity

Variation of the measured average: maximum 2%
We measure the sphericity of the ball at 16 different points and look at the deviations observed.
If the deviation exceeds 2% (FIFA standard), our engineers are tasked with improving the sphericity to guarantee a regular rebound.

Maximum pressure loss

We inflate the balloon to the recommended pressure (i.e. 0.8 bar).
72 hours later, the balloon should have lost no more than 15% of its pressure, i.e. around 0.1 bar. The pressure after 72 hours should therefore be around 0.7 bar.
This also means that it's perfectly normal for a balloon to lose pressure after a few days.

Maximum water absorption

In the laboratory, we simulate playing conditions in the rain by soaking the ball in 2 cm of water on a pivoting support while applying 250 compressions. At the end of the test, the ball should have gained no more than 20% of its weight, i.e. around 80 grams for this France size 5 ball.

Weight

Between 420 and 445 grams (size 5)

Rebound

Between 125 and 155 cm, with a maximum difference of 10 cm between the highest and lowest bounce per ball. Each ball is released 10 times onto a steel plate from a height of 2 meters.

Shape retention and pressure

The most demanding test we put this ball through is the machine kick test.
Withstands 2,500 kicks against an inclined concrete surface at 50km/h from a distance of 2.5m.
At the end of this test, we check:
- the general condition of the ball: the seams must withstand this test
- the circumference: it must not have increased by more than 1.5 cm
- the sphericity: it must not have varied by more than 1.5%
- the pressure: the ball must not have lost more than 0.1 bar

Warranty

2 years

VIDEOS

COMPOSITIONS / ADVICE

Composition

Outer shell 100% Polyvinyl chloride Bladder 70% Rubber latex, 30% Synthetic rubber Back 100% Polyester

STOCK TIPS

After use, store in a dry, well-ventilated place.

Restrictions

Not suitable for use on asphalt.

TESTS

Complies with the requirements of international federations.

USER REVIEWS

Questions & answers