Waterproofing
- 2-layer membrane fabric
- Heavy rain corresponds to a flow rate of 100L/m2/h - (= rainfall of 100mm/h)
- The rain shower simulator reproduces these conditions for 3h.
- Component resistant to a water pressure of 20,000mm after ageing (= 20000 Schmerber - average pressure exerted by water during a storm)
- Water-repellent components (water runs off the fabric).
- 100% taped seams.
- Central opening with gutter underflap for optimum waterproofing.
Breathability
RET<12 : très respirant.
Pour savoir si un tissu est respirant, on mesure sa résistance évaporative, appelée RET (test basé sur la norme ISO 11092). C’est sa capacité à laisser s’échapper vers l’extérieur la vapeur d’eau produite par le corps pendant l’effort.
Comfort
3-dimensional adjustable hood.
Adjustable hem.
Reflective elements
2 shoulder patches
2 hood patches
intensifying light sources.
step 1: before washing
Close all zips and flaps and remove any non-washable parts of the garment. Also remember to loosen straps and elastics and empty pockets.
Then turn the garment inside out to wash inside out.
step 2: washing your jacket
You can wash your jacket in a synthetic program at 30° or 40°C with your usual detergent. Do not use fabric softener, which could damage the garment's original performance, and of course do not use bleach.
Make sure you don't fold your jacket too much when you put it in the washing machine, and limit the load.
Very important: select a thorough rinse or double rinse to remove all detergent residues.
step 3: drying your jacket
Drying is essential to reactivate the water-repellent treatment.
We recommend that you let your jacket dry completely in the open air, flat on a drying rack. Never dry your jacket directly on a radiator.
Then tumble-dry on the synthetic program for a short time, i.e. 10 to 15 minutes, before putting it back on.
HOW TO REACTIVATE THE WATER REPELLENCY OF YOUR JACKET?
If, despite washing, rinsing and tumble-drying, water droplets no longer run off the surface of your jacket, we recommend "re-waterproofing" it with a spray sold in our stores.
Payment in 3 instalments is possible from a basket value of CHF 50 and requires the approval of our partner CembraPay. You will be able to choose this method of payment, and consult the terms and conditions and applicable fees when finalizing your order.
