How to use bicycle puncture repair spray?
1. Remove the object that caused the puncture
2. Shake the anti-puncture can vigorously
3. Position the valve in the 10 o'clock or 14 o'clock position of a time dial
4. Screw the appropriate end cap tightly onto the valve of your inner tube
5. Remove the safety cap
5. With the can upright (tip up), empty the entire contents at once
6. Rotate the wheel to distribute the product evenly
7. Drive a few kilometers, then reinflate to the correct pressure
Pro tip
It is advisable to replace the repaired inner tube at the end of your cycling trip.
This product can be used as a preventive measure for 3 months.
Optimum service life :
The formula of this puncture repair spray is effective for 2 years from the date of production (see marking on the product), provided the product is kept in the recommended conditions.
Precautions for use :
Extremely flammable aerosol. Pressurized container: may burst under heat. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and all other sources of ignition. Do not smoke. Do not spray on an open flame or any other source of ignition. Do not puncture or burn, even after use. Protect from sunlight. Do not expose to temperatures exceeding 50°C/ 122°F.
