How is isothermicity tested?
We have tested this isothermal bottle in the laboratory, to EN 12546-1, at an ambient temperature of 20°C, filled to its full volume. The time taken to go from 95°C to 50°C (drinking temperature felt to be warm enough to drink) is over 30 hours.
The secret of the isothermal water bottle?
The double-walled, air-vacuated stainless steel of this isothermal bottle blocks heat by conduction and convection. A thin layer of copper limits heat exchange by radiation.
Here are a few tips to improve isothermics: fill your bottle with hot water for 5 minutes, then replace the water with your hot liquids and close it. The fuller the bottle, the better the preservation.
Beware, as the gourd is very isothermal, liquids will remain hot for a long time.
What are the features of the 900 isothermal bottle?
The quick-release cap opens with one hand by lifting the white latch. It closes by pressing it down or screwing the cup back on.
A removable tea filter is attached to the cap, and simply pulled out to separate it from the cap. Caution: if you remove the filter after immersing it in a hot liquid, it may burn.
The included tumbler screws onto the bottle for easy transport, and is made of double-walled stainless steel with no air space.
What are the weight and dimensions of the 900 isothermal bottle?
Volume: 1 liter
Available in several sizes: 0.4L (reference 8641548) | 0.7L (reference 8641550) | 1L (reference 8750954) | 1.5L (reference 8901746)
Tumbler: 25 cl | 100 grams | Ø8.6 cm x 5.6 cm
Stopper: 30 grams | Ø4.5 cm x 6.2 cm
Strainer: 15 grams | Ø2.8 cm x 7.3 cm
How do I maintain my 900 isothermal bottle?
Before first use, wash and rinse the entire product 3 times.
For optimal washing and drying:
1. Separate all components;
2. Wash in soapy water by hand (use a fine brush to get into the nooks and crannies) or in the dishwasher;
3. Rinse in clean water;
4. Leave to dry separately. The cap must remain open when drying.
If you notice any odors, soak the bottle overnight in a solution of water and baking soda.
What are the regulations concerning the materials used in the 900 isothermal bottle?
Our products and materials meet current food contact standards. They do not contain Bisphenol A (BPA) in compliance with current French regulations. We have chosen 18/8 (304) stainless steel for the body of the bottle, recognized for its food safety, and heat- and shock-resistant polypropylene for the stopper.
Is the MH900 iosotherm gourd repairable?
Our products are with you every step of the way. As you progress, they age, and certain parts can wear out, break or get lost. To make it easier to repair your water bottles, our caps are available individually.
