Tips for optimizing the performance of your isothermal bottle
The fuller the bottle, the better it keeps warm or cold. Be careful when using hot liquids, as the gourd is very isothermal and liquids will remain hot for a long time! We use double-wall stainless steel technology with an air gap to block heat exchange by conduction or convection. To block heat exchange by radiation, a thin layer of copper covers the outside of the inner wall.
Features
The quick-release cap opens with one hand by lifting the white latch. It closes by pressing it down or screwing the cup back on.
A removable tea filter is attached to the cap, and simply pulled out to separate it from the cap. Caution: if you remove the filter after immersing it in a hot liquid, it may burn.
The included tumbler screws onto the bottle for easy transport, and is made of double-walled stainless steel with no air space.
Maintenance tips
Before first use, wash and rinse the entire product 3 times in clean water.
For optimum washing and drying:
1. Separate all components;
2. Wash by hand in soapy water (using a fine brush to get into the nooks and crannies). The bottle is dishwasher-safe, but avoid using the cap;
3. Rinse with clean water;
4. Leave to dry separately, leaving the cap open when drying.
Materials and regulations
Our products and materials meet current food contact standards. They do not contain Bisphenol A (BPA) in compliance with current French regulations. We have chosen 18/8 (304) stainless steel for the body of the bottle, recognized for its food safety, and heat- and shock-resistant polypropylene for the stopper.
Weights and dimensions
Volume: 0.4 liter
Available in several sizes: 0.4L (reference 8641548) | 0.7L (reference 8641550) | 1L (reference 8750954)
Overall dimensions: Ø 7 cm x 20.3 cm, body diameter Ø 6.5cm
Total weight: 320 grams
Stopper: 28 grams, Ø 4.5 cm x 6.2 cm
Strainer: 12 grams, Ø 2.8 cm x 7.3 cm
Tumbler: 62 grams, Ø 6.5 cm x 4.7 cm
Don't throw away, fix it
Our products are with you every step of the way. As you progress, they age, and certain parts can wear out, break or get lost. To make it easier to repair your water bottles, our caps are available individually.
Product design: our expertise
Our worldwide design center Quechua is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers...) and outdoor sports enthusiasts. A great asset for designing your mountain hiking products, and providing you with all our expertise.
