How to optimize the performance of your MH900 insulated bottle?
We use double-wall stainless steel technology with an air gap to block heat exchange by conduction or convection. To block exchanges by thermal radiation, a thin layer of copper covers the outside of the inner wall.
The fuller the bottle, the better it keeps hot and cold.
Caution: when using hot liquids, as the gourd is highly isothermal, they will remain hot for a long time.
Isothermal - laboratory-tested
This isothermal bottle has been laboratory-tested according to a protocol tried and tested by our engineers.
- Protocol:
1. Rinse bottle with boiling water.
2. Fill completely with water at 95°c. Close bottle.
3. Leave at room temperature (23°c) for 24 hours.
4. Measure water temperature drop after 6h, 12h and 24h.
- Performance: start at 95°c | after 6h = 83°c | after 12h = 75°c | after 24h = 63°c.
What are the features of the MH900 isothermal bottle?
The quick-release cap opens with one hand by lifting the white latch. It closes by pressing it down or screwing the cup back on.
A removable tea filter is attached to the cap, and simply pulled out to separate it from the cap. Caution: if you remove the filter after immersing it in a hot liquid, it may burn.
The included tumbler screws onto the bottle for easy transport, and is made of double-walled stainless steel with no air space.
What are the weight and dimensions of the MH900 isothermal bottle?
Volume: 1 liter
Available in several sizes: 0.4L (reference 8641548) | 0.7L (reference 8641550) | 1L (reference 8750954)
Tumbler: 25 cl | 100 grams | Ø8.6 cm x 5.6 cm
Stopper: 30 grams | Ø4.5 cm x 6.2 cm
Strainer: 15 grams | Ø2.8 cm x 7.3 cm
How do I maintain my MH900 isothermal bottle?
Before first use, wash and rinse the entire product 3 times.
For optimal washing and drying:
1. Separate all components;
2. Wash in soapy water by hand (use a fine brush to get into the nooks and crannies) or in the dishwasher;
3. Rinse in clean water;
4. Leave to dry separately. The cap must remain open when drying.
If you notice any odors, soak the bottle overnight in a solution of water and baking soda.
What are the regulations concerning the materials used in the MH900 isothermal bottle?
Our products and materials meet current food contact standards. They do not contain Bisphenol A (BPA) in compliance with current French regulations. We have chosen 18/8 (304) stainless steel for the body of the bottle, recognized for its food safety, and heat- and shock-resistant polypropylene for the stopper.
Is the MH900 iosotherm gourd repairable?
Our products are with you every step of the way. As you progress, they age, and certain parts can wear out, break or get lost. To make it easier to repair your water bottles, our caps are available individually.
