Separate clamping system - 3 zones
This boot's 3-zone tightening system is designed for demanding snowboarders:
1. Atop knurled tightening (knurled + laces + lace guide) for adjustable ankle support
2. Bottom tightening with laces blocked by a specially designed plastic part
3. Top tightening with laces for customized tightening force.
habu® Fit System (produced by Boa® technology)
The habu®FitSystem combines three important technical elements to transform the experience of snowboarders:
1) the innovative habu® knob ensures micro-adjustable and precise tightening,
2) the habu® cable is light, but very strong with its 75 stainless steel strands.
3) the habu® low-friction lacing guides ensure uniform pressure distribution while minimizing wear and guaranteeing good resistance over time.
How do I repair the habu®FitSystem?
Supplied by BOA Technology Inc, the knurls and laces of the habu® adjustment system have undergone thousands of hours of rigorous laboratory and field testing, and are guaranteed for the life of the boot on which they are integrated.
After-sales service is available at habufit.com/support
Shoe flexibility and rigidity
The medium flex (5/10) provides optimum comfort for freestyle riding, whether you're tweaking grabs, boxing or rail riding. A stiffer boot would be too demanding and less pleasant to ride in the park.
Flex Up added
The Flex Up (8600870), allows you to stiffen your boot by about 2 flex points out of 10 (with the flex up, this new boot has a stiffness of about 5/10).
This accessory is inserted into the tongue of Decathlon snowboard boots, starting with the 2022/23 season. A pocket is provided so that it can be positioned at the right height and sideways.
Heel support: level 3 liner (/3)
Foot support is an essential element in snowboarding for good board control (whether the foot is in the liner or the liner in the boot). The level 3 liner has 6 advantages:
1. Thermoformable liner from home
2. Ergonomic malleolar foam
3. Inner-boot tightening thanks to a textile web attached to the shoe
4. Foot-holding knob to secure the foot to the bottom of the shoe
5. Velcro top
6. 3D insole
1. Thermoforming the liner independently / CHECK POINTS
THERMOFORMING IS APPLICABLE ONLY ON ELECTRIC FURNACES WITH HEAT ROLLING MODE 56 x 60 x 56 cm. DO NOT USE WITH A GAS OVEN OR A SMALL AUXILIARY OVEN WITH VISIBLE ELECTRIC RESISTANCE.
1. Independent liner thermoforming / INSTRUCTIONS FOR USE
1. Heat your oven to 80°C, fan oven
2. Remove the inner soles of the slippers and place them on an oven tray lined with baking paper
3. Wait 15 min
4. Put the liners back on, slip on the booties with a pair of ski-snowboard socks and tighten them (not too tightly)
5. Put on boots and tighten to 5. Wait 15 minutes in static
This operation can be repeated if necessary.
2. Ergonomic Heel Pad malleolar foam
Malleolar foams fill the anatomical hollow below and behind the malleolus to cradle the heel. The level 3/3 liner features an exclusive foam shape and material Dreamscape :
- The shape is based on an average of 40 foot scans. It's perfect for cradling the foot and adapts to all
- The material: elastomer foam, soft and firm at the same time.
Simply slip it onto your foot, and you'll feel the support. And when you wrinkle, there's no hard spot.
3. Liner tightening with 3-point textile webbing
The lining of the Endzone boot is encased in a 3-point tightened textile web. This concept distributes the tightening force evenly around the foot, ensuring foot stability in the boot.
4.heel cushioning
We've added a layer of PU foam under the insole to provide comfort under the heel when landing jumps.
5. Velcro top
The top of the liner is fitted with Velcro fasteners to hold the liner tongue in place with the sides, whatever the foot's movements. This ensures that the foot stays firmly in place all day long.
6. 3D insole
The insole of this shoe is 3D. The insole is pre-formed at the heel and arch to limit foot movement in the shoe. It provides comfort and thermal insulation. To increase the foot's cushioning in the liner, but only if you feel you need it, there's an alternative: buy a thermo-formable insole for your foot. This is the most effective solution.
Sole: grip, cushioning and thermal insulation
Our ultralight sole is made exclusively of EVA. EVA is a very light material with 80% air. This formulation is designed to resist abrasion while retaining its cushioning properties. It is naturally highly insulating and protects against the cold coming up from the ground. We've designed large studs for excellent grip. The studs are spaced far enough apart to facilitate snow evacuation.
How can I be sure it's the right size?
1. Put on shoe
2. Tighten the shoe
3. Stand up
4. Your big toes touch the tip of the shoe without any uncomfortable pressure
5. Bend your legs forward, your big toes move backwards and no longer touch the tip of the shoe.
A word from the product manager
We have designed this shoe to provide you with better support and comfort when freestyling:
- Tightening sheet concept on the liner for optimized ankle support
- Targeted tightening knob to adjust support according to your sensitivity and style
- Classic lace tightening, with center piece to dissociate bottom and top tightening
- PU cushioning under the heel for comfort when landing
- EVA sole, 80% air, very light, insulating, protects from the cold