How do I repair habu® Fit System knobs and cables?
Supplied by BOA Technology Inc, the knurls and laces of the habu® adjustment system have undergone thousands of hours of rigorous laboratory and field testing, and are guaranteed for the life of the boot on which they are integrated.
After-sales service is available at habufit.com/support.
How to repair ATop knobs and cables
In the event of a problem, we have spare parts:
_ the tightening knob,
_ the tightening cable.
These parts are not available for sale as the repair procedure is not simple, but Decathlon store workshops have the spare parts references for this model and can repair your shoe.
habu® Fit System (produced by Boa® technology)
The habu®FitSystem combines three important technical elements to transform the experience of snowboarders:
1) the innovative habu® knob ensures micro-adjustable and precise tightening,
2) the habu® cable is lightweight, yet highly resistant with its 75 stainless steel strands.
3) the habu® low-friction lacing guides ensure even pressure distribution while minimizing wear and guaranteeing long life.
Separate clamping system - 2 zones
On the All Road 500, there are 2 independent tightening zones:
1. The habu® FitSystem micro-adjustable system for powerful, precise tightening of the lower part of the shoe.
2. Powerful strap to press the shoe against the shin.
Without this strap, with each flexion/extension, the shin becomes less and less tight and the foot more and more compressed. A shorter cable length stops this negative effect.
Shoe flexibility and rigidity
The stiffness (or flex) of the All Road 500 boots is medium (6/10). This is ideal for riders who need to hold a curve at high speed (i.e., need a stiff boot), while remaining reactive during small turns or surprise bumps that require rapid flexing-extension of the legs. Compared to the Snb 100 shoe, flex and heel support have been boosted.
Increase the rigidity of your boots by adding Flex Up
The Flex Up (8600870), allows you to stiffen your boot by about 2 flex points out of 10 (with the flex up, this new boot has a stiffness of about 5/10).
This plastic accessory is inserted into the tongue of Decathlon snowboard boots, from the 2022/23 season onwards. A pocket is provided to ensure that it is correctly positioned both vertically and laterally.
Flex Up comes into its own over time: if your boot becomes softer, give it a second life.
Heel support: level 2 liner (/3)
Foot support is an essential element in snowboarding for good board control (whether the foot is in the liner or the liner in the boot). The Level 2 liner offers 4 conceptual advantages:
1. Thermoformable liner from home
2. Ergonomic Heel Pad
3. 2-point liner tightening + shin strap,
4. Hook & Loop Link between liner and shoe
1. INDEPENDENT LINER THERMOFORMING / POINTS TO WATCH OUT FOR
THERMOFORMING IS ONLY APPLICABLE ON FLUSH-IN ELECTRIC OVENS WITH ROTATING HEAT MODE 56 x 60 x 56 cm.
DO NOT USE WITH GAS OVENS OR SMALL BACK-UP OVENS WITH VISIBLE ELECTRICAL RESISTANCE.
1. Independent liner thermoforming / INSTRUCTIONS FOR USE
1. Heat your oven to 80°C, fan oven
2. Remove the inner soles of the slippers and place them on an oven tray lined with baking paper
3. Wait 15 min
4. Put the liners back on, slip on the booties with a pair of ski-snowboard socks and tighten them (not too tightly)
5. Put on boots and tighten to 5. Wait 15 minutes in static
This operation can be repeated if necessary.
A video is available in this product sheet.
2. Ergonomic Heel Pad malleolar foam
Malleolar foams fill the anatomical hollow below and behind the malleolus to cradle the heel. The level 2 liner features an exclusive Wed'ze foam shape and material: - the shape is based on an average of 40 foot scans. The material: elastomeric foam, both soft and firm. Simply slip it onto your foot and feel the support. And when you wrinkle, there's no hard spot.
3. 2-point liner tightening + strap
On this liner, we have retained only 2 lace tightening points:
- at the instep,
- above the malleolus.
On the top of the liner, we have replaced the 3rd lacing point with a powerful tightening strap. This reduces lace friction (2 points instead of 3) and concentrates clamping force on heel support. On the upper part of the shoe, the strap locks the shoe even tighter to the shin.
4. Hook & Loop Shoe Link
We've added a velcro strap at the back between the liner and the shoe. The aim? To limit slippage of the liner inside the boot, to help you steer your board better. Because it's not enough to keep your foot securely in the liner: if the liner moves inside the boot, you won't steer your board as well.
Insole
The insole of this shoe is flat. It provides comfort and thermal insulation. To increase the foot's cushioning in the liner, 2 options are available: - purchase a pre-shaped insole in the arch and heel - purchase a thermo-formed insole for your foot. This is the most effective solution.
Sole: grip, cushioning and thermal insulation
Our Ultralight sole is made exclusively of EVA. EVA is a very light material with 80% air. This formulation is designed to resist abrasion while retaining its cushioning properties. It is naturally highly insulating and protects against the cold coming up from the ground. We've designed large studs for excellent grip. The studs are spaced far enough apart to facilitate snow evacuation.
How can I be sure it's the right size?
1. Put on the shoe
2. Tighten the shoe
3. Stand up
4. Your big toes touch the tip of the shoe without any uncomfortable pressure
5. Bend your legs forward, your big toes move backwards and no longer touch the tip of the shoe.
A word from the product manager
The All Road 500 snow boot has been improved thanks to your feedback.
_ season 19/20, we've added a softer, thermoformable liner foam for greater comfort,
_ season 20/21, we've moved the tightening knob to the side so that there's no interaction between the tightening knob and the tibial scracth,
_ season 22/23, we've changed our knob and cable supplier due to broken knobs.
Many thanks for your feedback, and happy riding to all.
Payment in 3 instalments is possible from a basket value of CHF 50 and requires the approval of our partner CembraPay. You will be able to choose this method of payment, and consult the terms and conditions and applicable fees when finalizing your order.
