A word from the product manager
Thank you.
Over the past 2 years, your opinions have shown us that this model could be improved, particularly in terms of comfort.
In January 2019, we made new booties and had them tested by 10° people, compared to the ones in store, blind. The verdict was unanimous: the new booties are much more comfortable.
This winter, 100% of Foraker 500s are with the new booties.
Thank you for your input on our products, which are becoming more and more yours.
CABLE LOCK - 2Z clamping system
_ Cable Lock: very powerful cable lock knob.
_ 2Z = 2 locking zones.
The strength of the knob is concentrated on the instep for a good fit, and the Velcro fastening at the top eliminates unwanted shin movement in the snowboard boot. In design, we did a lot of testing with and without the top strap. It provided so much support that we kept it.
Shoe flexibility and rigidity
The Foraker 500's flex is medium.
It's ideal for people who need to hold a curve with a lot of speed (needing a stiff shoe), but it also allows them to be reactive during small turns or surprise bumps that require rapid flexing-extension of the legs.
Compared to the Maoke 300 shoe, both flex and heel support have been boosted.
Heel support: level 2 liner
Foot support is an essential element in snowboarding for good board control (foot in liner but also liner in boot).
The level 2 liner has 5 concepts:
1. thermoformable liner at home
2. Ergonomic Heel Pad" malleolar foam
3. "2-point + strap" liner tightening
4. "Hook & Loop Link" liner-to-boot link
5. double-layer tongue foam on instep for support and comfort.
1. Thermoforming the liner independently / CHECK POINTS
THERMOFORMING IS ONLY APPLICABLE ON FLUSH-IN ELECTRIC OVENS WITH ROTATING HEAT MODE 56 x 60 x 56 cm.
DO NOT USE WITH GAS OVENS OR SMALL BACK-UP OVENS WITH VISIBLE ELECTRICAL RESISTANCE.
1. Independent liner thermoforming / INSTRUCTIONS FOR USE
1. Heat your oven to 80°C in fan-assisted mode
2. Remove the inner soles of the slippers and place them on an oven tray lined with baking parchment
3. Wait 15 min
4. Replace the insoles. Put on a pair of ski-snowboard socks. Put the boots on and tighten.
5. Put on boots and tighten.
5. Wait 15 minutes, static
This operation can be repeated if you still feel discomfort or a lack of support.
2. Ergonomic Heel Pad" malleolar foam
The malleolar foams fill the anatomical hollow below and behind the malleolus to cradle the heel.
The level 2 liner features Wed'ze's exclusive foam shape and material:
- the shape is based on an average of 40 foot scans. It's perfect for cradling the foot and adapts to all
- the material: elastomer foam, soft and firm at the same time.
Simply slip it on and you'll feel the support. And when you wrinkle, there's no hard spot.
3. 2-point liner tightening + strap
On this liner, we have kept only 2 lace tightening points:
- at the instep
- above the malleolus
At the top of the liner, we have replaced the 3rd lacing point with a powerful tightening strap.
We have therefore reduced lace friction (2 points instead of 3) and concentrated the tightening force to support the heel. On the upper part, the strap locks the shoe even tighter to the shin.
4. Hook & Loop Shoe Link
We've added a velcro strap to the back of the boot.
The aim? To limit slippage of the liner inside the boot, to help you pilot your board better. Because it's not enough to keep your foot securely in the liner: if the liner moves inside the boot, you won't pilot your board as well.
Insole
The insole of this shoe is flat. It provides comfort and thermal insulation. To increase the foot's cushioning in the liner, 2 options are available: - purchase a pre-shaped insole in the arch and heel - purchase a thermo-formed insole for your foot. This is the most effective solution.
Sole: grip, cushioning and thermal insulation
Our ultralight sole is made exclusively of EVA. EVA is a very light material with 80% air. This formulation is designed to resist abrasion while retaining its cushioning properties. It is naturally highly insulating and protects against the cold coming up from the ground. We've designed large studs for excellent grip. The studs are spaced far enough apart to facilitate snow evacuation.
How can I be sure it's the right size?
1. Put on the shoe
2. Tighten the shoe
3. Stand up
4. Your big toes touch the tip of the shoe without any uncomfortable pressure
5. Bend your legs forward, your big toes move backwards and no longer touch the tip of the shoe.