Grippy soles on footpaths
The design of the sole was the subject of extensive research in our laboratories. We have chosen a specific rubber formulation to optimize grip and adherence. We systematically seek the best compromise for use on soft (forest-type) and mineral (coastal-type) footpaths.
Road use may accelerate wear and discomfort. They are not suitable for mountain hiking.
Tested for optimum durability and strength
Laboratory tests are carried out to validate the following elements: eyelet and strap tearing, gluing, toxicology, UV resistance, abrasion of sole and upper components, accelerated ageing.
These tests enable us to improve the quality of our products and prevent premature wear of our hiking boots.
Waterproof footwear for 8-hour hikes in wet weather
NH500 WP shoes have been tested for 8000 flexes in the laboratory. They are therefore waterproof for 8h of hiking.
During the waterproofing test, we test 3 levels of waterproofing:
- 2000 flexes, about 2 h of hiking
- 4000 flexes, about 4 h of hiking
- 8000 flexes, about 8 h of hiking
We recommend using a waterproofing spray several times a year to restore the original water repellency and limit stains.
How do we test the waterproofness of your shoes?
Tested in the laboratory and in use, membrane-equipped footwear ensures optimum waterproofing and breathability. First immersed in water under air pressure, we check for the absence of bubbles on the shoe's surface. The shoes are then half-submerged and placed on a mechanical arm simulating walking, to check that the inside of the shoe remains perfectly dry.
How to choose the right hiking boot size?
Try on both shoes, standing up, with the socks used for hiking. Try several models and sizes if necessary. Two points of comfort should be checked:
- heel support
- forefoot support
Avoid compression points when trying on shoes. Don't hesitate to walk around to test comfort and support. Use your shoes progressively during your first hikes to get them to fit your feet.
Which pair of socks goes with Quechua NH500 MID waterproof shoes?
These shoes offer a little breathability, but not enough to wick away all the moisture from your perspiration. We therefore advise you to choose Hike 100 Mid socks: they contain moisture-absorbing cotton and have a loop construction that wicks moisture away from your foot. They're also high enough to protect your ankle from the shoe. It's an excellent combination for limiting the appearance of blisters.
How can you extend the life of the leather on your shoes?
After your hikes, we recommend :
- Leave to dry away from a source of heat
- On well-dried leather, brush vigorously with a hard brush to remove mud and dirt
- Use a crepe or nubuck brush to remove stains
- If stains remain, clean with a brush and a little lukewarm water
- Leave to dry
- Brush again with a hard brush
- Spray with waterproofing : this will give shine to the leather and liveliness to the color.
Payment in 3 instalments is possible from a basket value of CHF 50 and requires the approval of our partner CembraPay. You will be able to choose this method of payment, and consult the terms and conditions and applicable fees when finalizing your order.
