Thermal insulation details
Wet one-piece made of 7.5 mm 100% strectch panels with production tolerance. The neoprene foam is 7 mm, covered on both sides with nylon fabric.
Neoprene distribution: 100% stretch neoprene, with smooth edges at wrists and ankles to increase watertightness.
Once the thin film of water (drawn in through the zipper) is trapped between your body and the suit, water circulation is limited.
Glued and sewn joints - GBS
The seams of the wetsuit and hood are watertight, assembled using GBS (Glued and Blind Stitched): the neoprene is first glued, then stitched for maximum strength (the needle does not go all the way through the neoprene to prevent water infiltration).
Freedom of movement / Putting on and taking off the suit
One-piece with attached hood featuring the Air Expulse system: a system for evacuating air bubbles trapped in the hood.
Easy donning thanks to a diagonal front zip.
No seams under the armpits to facilitate arm mobility. Preformed cut on arms and legs, with cambered loins for ease of movement.
Reinforcements to limit wear
The suit is equipped with printed reinforcements on the knees to limit wear and tear.
Thermal performance class
This scuba diving suit offers you thermal protection tested by the independent institute INPP (Marseille-France) to validate its compliance with the current standard (NF EN 14225-1:2017).
This wetsuit is CLASS B approved:
A (+7°C/+12°C / +45°F/+54°F)
B (+10°C/+18°C / +50°F/+64°F)
C (+16°C/+24°C / +61°F/+75°F)
D (+22°C/+30°C / +72°F/+86°F).
Modulate your thickness, modulate your heat!
When diving, the cold is our worst enemy!
You need thermal protection to match the water temperature. To avoid having a wetsuit for every condition, the concept has been developed around 5 products that can be combined with your wetsuit depending on the temperature.
You can thus complete your thermal insulation with a balaclava, a neoprene top (mouse), a top with balaclava, an undershorty 1 mm or an overshorty 5.5 mm.
What is a wet suit?
This type of wetsuit is the most common on the market. Its purpose is not to act as a barrier to the water, but rather to trap it and allow your body to warm it up, creating a thermal buffer between you and the outside world.
Made from neoprene - a rubber polymer filled with air bubbles - these suits come in thicknesses from 0.5 to 7.5 mm .
As such, they make excellent wetsuits because they are flexible and modular.
Tips for putting on your wetsuit
Slip your foot into a plastic bag, then tuck your leg into your suit. Your foot will come out completely and snag-free!
To adjust it, ask someone else to blow into your sleeve from the wrist.
The air intake inflates the inside of the neoprene wetsuit and instantly lifts it off your skin. You can then easily make final adjustments.
Tips for maintaining your wetsuit
1) Soak wetsuit inside and out in clear water after each session.
2) Use a bactericidal solution to sanitize.
3) Rinse well in clear water.
4) Dry on a wide hanger in a shaded, well-ventilated area.
Caution: the sun discolors the textile parts of the suit and accelerates the aging of the neoprene.
Zippers can be cleaned with a toothbrush and lubricated with silicone grease.
Weight
S : 2.8 kg
M : 2.9 kg
L : 3 kg
XL : 3.1 kg
2XL : 3.2 kg
