UIAA Dry treatment :
The sheath and core are treated with a hydrophobic solution that limits the rope's water absorption. Less than 2% water retention.
The rope's mechanical characteristics are preserved longer in cold, damp conditions.
PlasmaFluid treatment :
Special treatment to improve string fluidity.
Weight :
39 g/m
ATTENTION: Weight is measured in accordance with EN 892.
For example, for a single rope, the rope must be tensioned by 10 kg for 1 min under very precise temperature and humidity conditions.
As a result, the actual weight of the rope is often greater than the weight stated in the standard.
Measuring weight in accordance with the standard enables ropes to be compared with each other.
Number of falls :
NUMBER OF FALLS: 6/12
IMPACT FORCE:7/10.6 KN
DYNAMIC ELONGATION: 28.5% / 27.6%
STATIC ELONGATION: 8.7% / 4.6%
SHEATH SLIP: 0
NUMBER OF SPLICES:32
WASH ITS ROPE:
It is essential to maintain your rope to limit wear and tear.
As dirt ages the rope, we recommend:
1- using a rope cover;
2- If the rope is sale, wash it with clear, lukewarm water.
If stains persist and you want to clean them with soap, use a neutral soap, such as Marseille soap, and rinse abundantly with clear water afterwards.
3- Dry in the open air and in the shade, away from any source of heat.
STORE YOUR ROPE:
Rope should be stored away from light, moisture, chemicals and heat. Be careful not to leave it inside a car in midsummer, for example.
CONTROL YOUR ROPE:
It's important to check your rope regularly. To do this, slide your hands over the rope and look closely, metre by metre, at the entire length of the rope. This will enable you to spot any cuts, nicks, abrasions or soft spots on the rope. If you notice any of these anomalies or irregularities, if the core is visible in certain places, if it is deformed or has been subject to too many falls, you need to change it. We don't play with safety!
Standards/Labels
EN 892:+A1: 2016
