Our team's advice:
Remove your wheels to protect your brake pads from splashes.
Shake the aerosol before use.
Apply directly to your transmission until you achieve the desired result.
Rinse and dry with a microfiber.
How to maintain your bike:
To ensure optimal maintenance, we recommend that you follow these 3 steps:
01 degrease your transmission
02 clean your bike
03 lubricate your chain
How to use this product:
Use this aerosol degreaser to carry out Step 1.
Once you've applied the degreaser, don't forget to spray on the bike cleaner, rinse and dry it (Step 2) and then apply your bike chain lubricant (Step 3) to get your bike looking like new again.
Care tip:
Before lubricating your chain, always remember to degrease it to remove residues that are abrasive to your transmission. This will extend the life of your equipment and save you money.
Directions for use :
300 ml aerosol for approx. 5 uses
Storage tip :
Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and all other sources of ignition. Do not smoke. Do not spray on an open flame or any other source of ignition. Do not puncture or burn, even after use. Protect from sunlight. Do not expose to temperatures exceeding 50°C.
Caution:
Avoid contact with brake pads.
In case of contact, rinse thoroughly and dry with microfiber.
CAUTION. Flammable aerosol. Pressurized container: may burst when heated. In case of medical advice, keep container available or
label.
Did you know?
CO2 is a much better propellant than the butane previously used for this product. In fact, for the same quantity of product to be used, 8 times less gas is required.
