Our team's advice:
For impeccable results on your chain/transmission, here's our advice:
Apply the degreaser with a brush or with our chain cleaner.
Scrub with a brush in the most difficult places (derailleur rollers, cassette).
Leave to act for a few seconds, then rinse with water until residues and black marks disappear. Dry the chain and drivetrain with a microfiber or compressor.
You can then lubricate.
How much degreaser should I use?
If you use a brush to apply this degreaser, you will need about 25 ml of product for a good use (about 20 uses with this bottle).
If you use this degreaser with our chain cleaner, you will need 9 ml per use (about 55 uses with this 500ml bottle).
How to maintain your bike:
To ensure optimal maintenance, we recommend that you follow these 3 steps:
01 degrease your transmission
02 clean your bike
03 lubricate your chain
How to use this product:
Use this plant-based degreaser to carry out Step 1.
Once you've applied the degreaser, don't forget to spray on the bike cleaner, rinse and dry it (Step 2) and then apply your bike chain lubricant (Step 3) to get your bike looking like new again.
Care tip:
Before lubricating your chain, always remember to degrease it to remove residues that are abrasive to your transmission. This will extend the life of your equipment and save you money.
Caution:
Avoid spraying on your brake discs or pads.
Protect them with a microfiber cloth.
Directions for use :
500ml canister for approx. 15 uses
Did you know?
This product was designed, formulated, produced and packaged in France.
