A non-compensated first stage, it works with both hot and cold water.
The SUBEA SCD 100 is a "club" regulator distinguished by its reliability, sturdiness and ease of maintenance. This SUBEA regulator is not compensated, and works equally well in warm and cold water. It just requires a greater ventilatory effort depending on depth.
There are 1 high-pressure outlet (HP - 7/16'') and 4 medium-pressure outlets (LP - 3/8).
The second floor and easier inspiration
A second stage regulator must translate natural breathing behavior into a mechanical reality. High-quality second stage regulators can significantly reduce stress, helping to improve diver safety by supplying air more easily and in sufficient quantity, without the need for unnecessary effort.
The hydrodynamic openings in the hood make breathing in easier. This exclusive hood design also eliminates the need for continuous flow from the regulator.
Expiration: more visibility and less noise
During exhalation, ergonomic whiskers channel the flow of air bubbles to the cheeks, so that the noise doesn't disturb the diver and the bubbles don't pass in front of the mask. Less discomfort during practice and more pleasure in the activity!
SUBEA regulators: exclusive anatomical mouthpiece!
These regulator mouthpieces have been designed to guarantee excellent comfort in the mouth, thanks to their anatomical tip developed with orthodontists. The exclusive shape of this mouthpiece facilitates support in the mouth, thanks to the palate fins, lingual support and different material thicknesses and densities (mono or bi-density), taking into account the angle of jaw closure.
Regulator certification
This regulator is certified to EN250:2014. Tests carried out by RINA, Genova- Italia (certified body no. 0474). Tests are carried out on a breathing machine that simulates the diver's breathing. Tests are carried out at the pressure equivalent to 50 meters depth, with a ventilatory amplitude of 2.5 liters (inspiration/expiration), a ventilatory flow rate of 62.5 liters/minute, i.e. 25 cycles per minute, and at a temperature of 10°C or 4°C for cold water.
Certification and ventilatory effort measurements
Le détendeurs SUBEA SCD 100 est équipé d’un premier étage non compensé et certifié pour une utilisation en eau froide (<10°C) et eau non froide (>10 °C) et
Le détendeur DIN est certifié 300b bars.
Résultats des tests de certification de l'effort ventilatoire (simulation pression à 50 m et eau à 4 °C)
- pression bloc à 200 bars : 1,53 J/L
- pression bloc à 110 bars : 1,86 J/L
- pression bloc à 50 bars : 1,88 J/L.
Weight and hose length
First stage weight: 475 grams.
Second stage weight: 200 grams.
Hose weight: 150 grams.
Total weight: 825 grams.
Hose length: 75 cm.
Maintenance tips
Never use solvents or hydrocarbon-based products to clean or lubricate your regulator yourself. Never use aerosol cans, as the propellants may attack plastics.
Regulator overhaul
SUBEA recommends that you have your regulator overhauled every two years, and visually inspected at least once a year. Both examinations should be carried out by a certified workshop SUBEA.
An overhaul is also recommended after a particularly intense season (more than 100 dives) or after a long period of inactivity.
https://support.decathlon.fr/detendeur-de-plongee-notice-reparation