ROCKRIDER

FRONT-REAR RIGID V3 BLACK 26" - 27.5" - 29" MOUNTAIN BIKE MUDGUARD KIT

17.90
Pay with
Ref. : 8913864

Designed to protect your lower back, torso and face from mud splashes when hiking.

This 26" to 29" front + rear mudguard kit is easy to assemble and disassemble. Clipped onto screwed fasteners, it provides a perfect fit for your mountain bike outings!

In-store collection

PRODUCT BENEFITS

Non-smudging

This kit effectively protects your lower back, torso and face from mud splashes.

Compatibility

This kit is suitable for 26" to 29" mountain bikes equipped with telescopic forks.

Weight

Front weight: 120 grams Rear weight: 230 grams Total: 350 grams

Easy assembly/disassembly

Assembled/disassembled with a click on screwed fasteners, it retains its positional settings.

Robustness

The rear is fitted with a "fuse" arm (which disconnects) in the event of heavy impact.

TECHNICAL INFORMATION

Protection level

This wide, impact-resistant mudguard kit protects your lower back, torso and face from mud splashes.
To do this, place the rear mudguard as close as possible (2 to 3 cm) to the wheel.

In wet conditions, you can never completely escape mud splashes... For utilitarian trips, if your bike frame and tire width allow it, opt instead for a VTC mudguard kit (with longer blades closer to the wheels).

Bike compatibility

This kit is suitable for mountain bikes from 26" to 29", with a tire width of up to 2.8" on 27.5" and 2.6" on 29", equipped with telescopic forks.

For proper front mounting, the inner diameter of the fork steerer tube must be between 18 and 34 mm.

For proper rear mounting, the seatpost diameter must be between 25.4 and 34.9 mm.

Box contents

The front mudguard is supplied with 2 expanders for mounting on fork steerers with diameters ranging from 19.2 to 24.2 mm and from 29 to 35 mm.

The rear mudguard is supplied fully assembled, ready for fitting, whatever the diameter of your seatpost.

Modern, efficient design

Adapted to the wheel sizes and tire sections on the market, and with dynamic lines, our kit has been designed to bring a modern and sporty touch to your bike.

Everything has been thought out to offer you an optimal experience:
-Fastening by screw, reliable during use, preserving position adjustments
-Easy clipping/unclipping of the blades to adapt your bike to the weather in a click
- "Fusible" arms to avoid breakage
-Compatibility with accessories (camera, lighting...).

Compatible accessories

In dry weather, when there's no rain or mud, you can unclip the blade from the rear mudguard bracket and clip on a sports camera instead. GoPro-style clip-on system.

For your safety when you're on the road early in the morning or late at night. A rail is provided at the end of the rear mudguard blade to accommodate a CL 100, CL 500, CL 900, ST 500 or RL 510 type red rear light.

Dimensions and weights

Front:
Blade length: 553 mm
Blade width: 73 to 97 mm
Total weight: 120 grams

Rear:
Blade length: 497 mm
Blade width: 73 to 95 mm
Total weight: 230 grams

COMPOSITIONS / ADVICE

Composition

Mudguard 81.15% Polypropylene, 7.38% Polyamide, 5.75% Polyoxymethylene, 3.16% Fiberglass, 2.56% Steel

Restrictions

Not suitable for bikes with rigid forks

Terms of use

https://cdn.decathlon-share.com/product-user-guide/620280cf3d116/mudguard-kit-instructions.pdf

USER REVIEWS

Questions & answers

See also