Technical data
Length: 76 cm
1st stage connection: 3/8 UNF male connection. Tightening torque flat wrench 9/16th inch (between European 13 and 14).
Direct System: female QD (Quick Disconnect) connection.
Outer coating: rubber.
Assembly tips
We advise you not to overtighten the first stage. Overtightening could damage the first stage, which is generally made of chromium-plated brass (a soft alloy). The hose's O-ring provides the necessary seal.
Use silicone grease to lubricate the seals and extend their life.
Hose wear and replacement
Successive pressurization of the regulator and cracking make the hose more fragile. This generally invisible wear and tear will affect your regulator's performance. In the worst case, your hose will eventually break, usually at the crimp.
Check your hoses regularly and replace any that are cracked.
Change your hoses every 5 years at most.
Regulator overhaul
SUBEA-TRIBORD recommends that you have your regulator serviced every two years and visually inspected at least once a year. Both examinations should be carried out by a certified workshop SUBEA-TRIBORD.
An overhaul is also recommended after a particularly intense season (more than 100 dives) or after a long period of inactivity.
Regulator maintenance
Never use solvents or hydrocarbon-based products to clean or lubricate your regulator yourself. Never use aerosol cans, as the propellants may attack plastics.
Product warranty
SUBEA-TRIBORD products are guaranteed for two years (in accordance with the legal provisions applicable in each country) from the date of purchase, and for two years (in accordance with the legal provisions applicable in each country) from the date of discovery of the defect for the legal warranty against latent defects.
Our products are manufactured for sporting, non-professional use. The warranty does not cover damage caused by impact, misuse or normal wear and tear.
