SAFETY
Product certified by the independent organization Tüv: Type 2 of the ISO 6185 standard.
This product is not intended for children under 12 years of age.
Teenagers between 13 and 17 years of age must use the product under the direct supervision of an adult.
Always wear a life jacket.
Consult local regulations and information concerning the dangers of float tubes and navigation.
Maximum load capacity: 130kg
Maximum motorizable power: 300watts
PRE-EQUIPPED FOR FLTB MTR ENGINE
The FLTB-5 V2 is pre-equipped for easy addition of the FLTB MTR motor (8666881 not supplied)
The base under the seat allows the motor to be clipped on quickly and easily.
The cable gland behind the backrest allows you to easily connect the motor to the battery (not supplied), which must be stored in a watertight rear bakkan (8606699 not supplied)
All that's left to do is position the control box within easy reach.
COMPATIBLE ACCESSORIES
To increase your fishing comfort, here are the compatible accessories: (not included)
8606699 BAKKAN FLTB REAR: trapezoidal rear bakkan to increase your storage capacity
8737484 FLTB KPN: floating basket to store your catch
8560032 FLTB SDC: rod holder to transport your 4 sets safely
8560034 FLTB SES: echo sounder holder to easily mount your electronics
INFLATION AND INSTALLATION
Lay the float tube flat on a clean surface.
Inflate the seat and then the side bladders to 1.5PSI/0.1bar to avoid the risk of over-inflation and/or explosion.
We recommend using the FLTB PLP 10PSI pump (ref: 8643922) with its built-in pressure gauge to ensure accurate inflation.
Once seated, fit the apron.
DEFLATION AND STORAGE
Deflate the float tube by carefully unscrewing the valves.
Fold the left side of the float tube over the seat, then the right side.
Starting from the front tip, fold the tip over the length of the seat.
Do the same for the ends of the two bladders.
Insert the float tube into the bag.
Once dry, your FLTB-5 can be stored, folded, in its carry bag.
You'll extend its lifespan by storing it flat, slightly inflated.
DIMENSIONS AND WEIGHTS
FLOAT TUBE FLTB-5 V2: 115 x 145cm (width x length)
Diameter of side flanges 35cm
Inflated seat dimensions: 46 x 40cm (width x depth)
Dimensions folded in carry bag: 75 x 43.5 X 10cm
Weight: 6.2kg (without bakkans and carry bag)
BAKKAN 500 S / Volume: 4L
Dimensions: 21.5 x 14.5 x 11cm
BAKKAN 500 M / Volume: 6L
Dimensions: 25 x 22 x 12cm
BAKKAN 500 L / Volume: 10L
Dimensions: 39.5 x 23.5 x 12cm
EQUIPMENT
The bag contains:
- the float tube with the 4 valves and bladders positioned in the compartments
- the apron with its measuring gauge (up to 60cm)
- the integrated side rod holder (1 rod)
- 3 bakkans for accessory storage (see dimensions below)
- the ventilated carry bag
- the user guide + manual
- a glueless repair kit
Materials used:
Main part: P600 and PVC tarpaulin (0.45mm)
Vessels: PVC (0.45mm)
Bakkans: PVC
SPARE PARTS
The following parts are available on this website or in store (to order):
8754652 SEAT BLADDER FLTB-5
8754650 BACK BLADDER FLTB-5
8552350 RIGHT BLADDER FLTB-5
8552351 LEFT BLADDER FLTB-5
8649864 VALVE MINI BOSTON (back and seat bladders)
8649866 or 8187669 or 8338891 VALVE BOSTON (side bladders)
8842490 CONNECTOR FLTB-5 V2
8512384 REPAIR KIT
Warranty
2 years (sewn and glued parts)
Perforation (bladders) is not covered under warranty.
