CAPERLAN

FLTB 5 V2 motorizable grey / orange float tube for predators

239.90
3x Pay in 3x with
Payment in 3 instalments is possible from a basket value of CHF 50 and requires the approval of our partner CembraPay. You will be able to choose this payment method, as well as consult the General Terms and Conditions and the applicable fees when finalizing your order.
Ref. : 8643994

Our designer anglers have developed this float tube with a comfortable inflatable seat to reach fishing areas inaccessible from the shore.

Lightweight, this float tube is easy to transport thanks to its shoulder straps. Detachable panniers (bakkans) make fishing easier. This new version can be motorized with the FLTB-MTR.

Color : dark gray / fluorescent orange

In-store collection

PRODUCT BENEFITS

Compatibility

This new version can be motorized with the FLTB MTR motor ref: 8666881.

Seating comfort

Ergonomic, adjustable inflatable seat. Optimized position for fishing.

Stability

The 35cm diameter of the side flanges ensures good fishing stability.

Modularity

The 3 bakkans can be repositioned as you wish. You can add more.

Carrying comfort

Shoulder straps on the backrest to keep your back dry on the move.

Parameter measurement

The semi-rigid apron allows you to easily measure your catches up to 60cm.

Repair

See the SPARE PARTS section.

IMAGES

Float tube pêche des carnassiers FLTB 5 V2 Motorisable Gris / Orange
Float tube pêche des carnassiers FLTB 5 V2 Motorisable Gris / Orange
Float tube pêche des carnassiers FLTB 5 V2 Motorisable Gris / Orange
Float tube pêche des carnassiers FLTB 5 V2 Motorisable Gris / Orange
Float tube pêche des carnassiers FLTB 5 V2 Motorisable Gris / Orange
Float tube pêche des carnassiers FLTB 5 V2 Motorisable Gris / Orange

TECHNICAL INFORMATION

SAFETY

Product certified by the independent organization Tüv: Type 2 of the ISO 6185 standard.
This product is not intended for children under 12 years of age.
Teenagers between 13 and 17 years of age must use the product under the direct supervision of an adult.
Always wear a life jacket.
Consult local regulations and information concerning the dangers of float tubes and navigation.
Maximum load capacity: 130kg
Maximum motorizable power: 300watts

PRE-EQUIPPED FOR FLTB MTR ENGINE

The FLTB-5 V2 is pre-equipped for easy addition of the FLTB MTR motor (8666881 not supplied)
The base under the seat allows the motor to be clipped on quickly and easily.
The cable gland behind the backrest allows you to easily connect the motor to the battery (not supplied), which must be stored in a watertight rear bakkan (8606699 not supplied)
All that's left to do is position the control box within easy reach.

COMPATIBLE ACCESSORIES

To increase your fishing comfort, here are the compatible accessories: (not included)
8606699 BAKKAN FLTB REAR: trapezoidal rear bakkan to increase your storage capacity
8737484 FLTB KPN: floating basket to store your catch
8560032 FLTB SDC: rod holder to transport your 4 sets safely
8560034 FLTB SES: echo sounder holder to easily mount your electronics

INFLATION AND INSTALLATION

Lay the float tube flat on a clean surface.
Inflate the seat and then the side bladders to 1.5PSI/0.1bar to avoid the risk of over-inflation and/or explosion.
We recommend using the FLTB PLP 10PSI pump (ref: 8643922) with its built-in pressure gauge to ensure accurate inflation.
Once seated, fit the apron.

DEFLATION AND STORAGE

Deflate the float tube by carefully unscrewing the valves.
Fold the left side of the float tube over the seat, then the right side.
Starting from the front tip, fold the tip over the length of the seat.
Do the same for the ends of the two bladders.
Insert the float tube into the bag.
Once dry, your FLTB-5 can be stored, folded, in its carry bag.
You'll extend its lifespan by storing it flat, slightly inflated.

DIMENSIONS AND WEIGHTS

FLOAT TUBE FLTB-5 V2: 115 x 145cm (width x length)
Diameter of side flanges 35cm
Inflated seat dimensions: 46 x 40cm (width x depth)
Dimensions folded in carry bag: 75 x 43.5 X 10cm
Weight: 6.2kg (without bakkans and carry bag)
BAKKAN 500 S / Volume: 4L
Dimensions: 21.5 x 14.5 x 11cm
BAKKAN 500 M / Volume: 6L
Dimensions: 25 x 22 x 12cm
BAKKAN 500 L / Volume: 10L
Dimensions: 39.5 x 23.5 x 12cm

EQUIPMENT

The bag contains:
- the float tube with the 4 valves and bladders positioned in the compartments
- the apron with its measuring gauge (up to 60cm)
- the integrated side rod holder (1 rod)
- 3 bakkans for accessory storage (see dimensions below)
- the ventilated carry bag
- the user guide + manual
- a glueless repair kit

Materials used:
Main part: P600 and PVC tarpaulin (0.45mm)
Vessels: PVC (0.45mm)
Bakkans: PVC

SPARE PARTS

The following parts are available on this website or in store (to order):
8754652 SEAT BLADDER FLTB-5
8754650 BACK BLADDER FLTB-5
8552350 RIGHT BLADDER FLTB-5
8552351 LEFT BLADDER FLTB-5
8649864 VALVE MINI BOSTON (back and seat bladders)
8649866 or 8187669 or 8338891 VALVE BOSTON (side bladders)
8842490 CONNECTOR FLTB-5 V2
8512384 REPAIR KIT

Warranty

2 years (sewn and glued parts)
Perforation (bladders) is not covered under warranty.

COMPOSITIONS / ADVICE

Composition

Film 100% Polyvinyl chloride Back fabric 90% Polyvinyl chloride, 10% Polyurethane Main fabric 100% Polyester

STOCK TIPS

Once dry, your float tube can be stored folded in its carry bag.
You can extend its life by storing it flat, slightly inflated, away from heat and humidity.

Restrictions

Max. load: 130 kg (6kg at stern)
Stillwater fishing use

Maintenance tips

Hand wash

No bleaching

No tumble drying

No ironing

No dry cleaning

USER REVIEWS

Questions & answers

See also