Stabilizer vest type
This vest is equipped with a wrap-around bladder. The way the vest is connected to the harness allows the inflatable bladder to extend outwards. Thanks to this special design, compression of the chest during dives is avoided.
Stabilizer vest modularity
The Rock Pro vest has 6 stainless steel attachment rings.
2 removable ballast pockets with visual confirmation of correct insertion.
Maximum load 6kg/13lbs (sizes M to XL or 4kg for size S).
2 large zipped pockets with internal elastic strap for
attaching accessory clips.
More
The vest is equipped with two quick release and overpressure vents, one on the right shoulder and one on the bottom right, as well as a corrugated relief valve. All valves are "low-profile" for minimum bulk and resistance.
The Rock Pro comes with two cylinder attachment straps for more stable and secure positioning.
The low weight of this stab makes it ideal as travel diving equipment!
Product composition
Material: Cordura®420.
Weight and buoyancy
3.2 KG in size S and 150 Newton
3.3 KG in size M and 160 Newton
3.4 KG in size L and 200 Newton
3.45KG in size XL and 230 Newton
Care instructions Regular
1/ Thoroughly rinse your vest with clean water. Pay particular attention to the bleed nipples and inflator. 2/ Empty any water remaining in the vest by operating the lower bleed valve. Do not store water in the vest's inflatable bladder. 3/ Dry your vest on a wide hanger out of direct sunlight. Inspect your jacket yourself every year, looking for any signs of wear. Inflate (by mouth) the inflatable chamber, wait 12 hours and check that it has not deflated.
Overhaul of stabilizing jackets
Your stabilizing vest should be inspected and serviced by an authorized Mares center at least every two years, and more often if you dive frequently. After-sales service: https://support.decathlon.fr/plongee-fr-tp_20687
