QUECHUA

0.35L stainless steel insulated child's water bottle with instant stopper for hiking

18.-
Pay with
Ref. : 8641544

This sturdy, highly insulating, double-walled stainless steel water bottle will keep your drinks, hot or cold, at the right temperature for several hours.

The instant cap is easy to use, opening with one hand thanks to its ergonomic button. The 0.35L bottle won't leak when upside down with the cap open. Ideal for children.

In-store collection

All about

PRODUCT BENEFITS

Waterproofing

Do not remove the transparent inner valve to ensure a watertight seal.

Isotherm

Keeps drinks warm for up to 12 hours | Complies with ISO12546-1 standard

Capacity

0.35 liter, ideal for a child | Dimensions: Ø7cm x 17.5cm | Weight: 200g.

Easy to open and close

Plug with ergonomic button, opens and closes instantly with one hand.

Ease of use

Carrying handle l Wide neck l Screw cap, opens and closes in 1/4 turn

Solidity

Double-wall construction in 18/8 stainless steel (304) with an air gap in between.

Repair

Compatible plugs, available individually, ref. 8615551, 8575855 and 8359137.

Easy maintenance

Easy to clean thanks to its wide neck and stainless steel wall.

TECHNICAL INFORMATION

Optimum flow and leak-tightness thanks to cap valve

This water bottle has a cap specially designed for children. It has a transparent silicone valve inside to limit the flow of water, making it ideal for a child, and also to block the water outlet when the bottle is not upright, ensuring a watertight seal even with the cap open.
Make sure this valve is present and properly seated in its housing. If not, the bottle will leak.
It is advisable to remove it to clean your bottle.

How is isothermicity tested?

We tested this food bottle in the laboratory, in accordance with EN 12546-1, at an ambient temperature of 20°C, filled to capacity. The time taken to go from 95°C to 50°C (drinking temperature felt to be hot enough to drink) is 12 hours.

The secret of the isothermal water bottle?

The double-walled, air-vacuated stainless steel of this isothermal flask blocks heat by conduction and convection. A thin layer of copper limits heat exchange by radiation.
Here are a few tips to improve isothermics: fill your gourd with hot water for 5 minutes, then replace the water with your hot liquids and close it. The fuller the gourd, the better the preservation.
Please note that, as the gourd is very isothermal, liquids will remain hot for a long time.

How do I use a child's isothermal water bottle?

Do not use with carbonated drinks, fats (dairy products, oils, etc.) or acidic beverages (fruit juices, energy drinks).
Do not microwave, freeze or expose to flames.
The cap is fitted with a handle for easy carrying by hand, or for attaching to a backpack with a strap or carabiner.

How do I maintain and clean my child's insulated water bottle?

Before using for the first time, wash and rinse the entire product 3 times.
Clean your gourd after each use.
For optimal washing and drying by hand:
1. Separate all components, making sure to remove the transparent valve;
2. Wash by hand in hot, soapy water (use a fine, delicate brush to get into the nooks and crannies);
3. Rinse with clear water;
4. Leave to dry separately, leaving the cap open while drying.

How do I thoroughly clean my child's insulated water bottle?

The gourd can also be put in the dishwasher if required. Please note that the seal and the valve on the cap may come off. Be sure to put them back on if this happens, to guarantee the watertightness of your bottle.

In case of odor, soak the bottle overnight in a solution of water and baking soda.

What are the regulations concerning the materials used in children's isothermal water bottles?

Our products and materials meet current food contact standards. They do not contain Bisphenol A (BPA) in compliance with current French regulations. We have chosen 18/8 (304) stainless steel for the body of the bottle, recognized for its food safety, and heat- and shock-resistant polypropylene for the stopper.

Can a child's insulated water bottle be repaired?

Our water bottles will accompany you on your hikes.
Over time, some parts may wear out or break.
To facilitate repair, the product is compatible with other stoppers in the range, available individually:
- the 100 stainless steel stopper (part no. 8615551);
- the 500 stopper (part no. 8575855) for look and more sporting use;
- the 900 pipette stopper (part no. 8359137).
Don't throw it away, repair it!

Warranty

2 years

COMPOSITIONS / ADVICE

Composition

Bottle body 100% Lid 87% Polypropylene, 8% Silicone, 5% Silicone

STOCK TIPS

Wash and dry before storage. Store with cap open. Store in a clean, dry place.

Restrictions

No alcohol. Do not freeze or microwave.

TESTS

Our laboratory, Decathlon Sportslab, contributes to the innovation and development of our products Quechua.
It groups together 4 themes, each with its own space and technological tools:
- Morphology (thanks in particular to 3D analysis);
- Movement sciences;
- Thermal comfort (with its four climatic chambers);
- Behavioral and sensory sciences.
This isothermal bottle has been tested to validate its ability to retain heat or cold.

Approved by

To meet your requirements, Quechua products are tested in the mountains, in the conditions you may encounter on your hikes. Our teams and a panel of testers (made up of partners, ambassadors and customers) put our products through their paces from development to marketing.

Maintenance tips

No washing

No bleaching

No tumble drying

No ironing

No dry cleaning

USER REVIEWS

Questions & answers

See also