Why maintain your bike?
Maintaining your bike will:
- Extend the life of your various components
- Ensure it runs smoothly
- Reduce unwanted noise
- Prevent breakage
- Enjoy riding a clean bike
How to maintain your bike:
To ensure complete maintenance, we recommend that you follow these 3 steps:
01 degrease your transmission
02 clean your bike
03 lubricate your chain
Kit contents :
This kit includes the 3 products needed to carry out the 3 steps required for proper maintenance of your bike. You will be able to carry out a minimum of 3 complete maintenance operations on your bike.
Products contained in this kit:
01 Vegetable degreaser (100 ml)
02 Concentrated bike cleaner (100 ml)
03 All-weather chain lubricant (50 ml)
How to use your transmission degreaser :
This degreaser will effectively degrease your transmission. You can apply it with a brush or our chain cleaner.
Brush application: pour about 25 ml into a jar and apply generously to your chain, cassette, derailleurs and derailleur rollers. Leave to act for a few moments, then go on to step 2.
Application with the chain cleaner: pour in around 9 ml, turn the pedals a few times before going on to step 2.
How to use your concentrated bike cleaner :
Pour around 30 ml of concentrate into a bucket of water, then apply generously with a sponge to your bike.
This product will respect your bike's paintwork and all its components.
Rinse with clean water, then dry your bike. Pay particular attention to drying, especially your drivetrain, to ensure total efficiency. You can then move on to step 3.
How to use your chain lubricant :
Remove the cap, position the applicator on the lower part of your chain (inner side) and make one complete turn (reverse pedaling direction).
To make sure you don't apply too much, use your quick-release as a reference.
Remove excess lubricant with a cloth placed under the chain, then make 2 or 3 complete pedal turns (reverse pedaling direction)
This lubricant will protect your chain in all conditions.
Good to know:
01 Degrease your drivetrain: if you apply the product with a brush, be careful not to spray the dirt towards you.
02 Concentrated bike cleaner: in winter, use lukewarm water to make this step more comfortable, and the opposite in summer.
03 Chain lubricant: apply to the inside of the chain, positioning the applicator on the lower part of the chain.
Care tip:
Before lubricating your chain, always remember to degrease it to remove residues that are abrasive to your transmission. This will extend the life of your equipment and save you money.
Transmission degreaser composition :
List of ingredients (Regulation (EC) Nr. 648/2004 on detergents):
MIX OF SATURATED AND INSATURATED FATTY ACID METHYL ESTER
PEG-30 GLYCERYL COCOATE
Each ingredient is indicated with its INCI name (International Nomenclature of Cosmetic Ingredients).
Concentrated cleanser composition:
List of ingredients (Regulation (EC) Nr. 648/2004 on detergents):
AQUA | SODIUM LAURETH SULFATE | COCAMIDOPROPYLBETAINE | ALPHA OLEFIN SULFONATE | PHENOXYETHANOL | SODIUM CHLORIDE | PARFUM | CITRIC ACID | COLOURANT
Each ingredient is indicated with its INCI name (International Nomenclature of Cosmetic Ingredients)
DANGER. Causes skin irritation. Causes severe eye damage. Wear protective gloves and eye protection.
Chain lubricant composition :
Synthetic oil with additives for anti-wear properties, corrosion protection and washout resistance.
