PressFit 30 (46mm) frame cups. Once press-fit in your frame, you can mount any threaded housing in standard reverse pitch (BSA/BSC).
Supplied with bushes and spacers.48g
Your bike creaks when you press hard on the pedals, the crankset movement has lost its fluidity or taken up play? The symptoms are clear: it's time to change your bottom bracket. Like all the parts that make up your bike, the bottom bracket and especially its bearings are subject to wear.
Replacing it is a simple operation if well prepared, although the multiplication of bearing, bottom bracket and frame standards may discourage some. We'll try to guide you through this jungle of standards. The bottom bracket is the interface between your crankset and your frame, so the first thing to do is to identify which crankset you want to fit into which frame?
- Internal can diameter
- Box width
- MontageStandard
- Recommended crankset axle
- 34.8 mm68 mmTo ScrewBSA / BSC24 mm / GXP / Dub 29 mm36 mm70 mmTo ScrewItalien24 mm37 mm90.5 mmTo PressBB 90 (Trek)24 mm / GXP / Dub 29 mm41 mm86.5 mmTo PressPF 86 (Shimano)24 mm / GXP / Dub 29 mm41 mm89,5 mmÀ PresserPF 90 (Shimano)24 mm / GXP / Dub 29 mm42 mm68 mmÀ PresserBB 3030mm / Dub 29 mm42 mm79 mmÀ PresserBB Right30mm / Dub 29 mm46 mm61 mmÀ PresserSpecialized30mm / Dub 29 mm46 mm68 mmÀ PresserPF 3030mm / Dub 29 mm46 mm79 mmÀ PresserBB Right PF 36030mm / Dub 29 mm46 mm86,5 mmÀ Presser386 EVO30mm / Dub 29 mm
- We recommend that you disassemble your original bottom bracket to accurately measure the dimensions of your frame's bottom bracket ** This compatibility is given as an indication only, there are also 'adapter' bottom brackets that allow you to mix standards.
Features:
- Box width 68
- 73 Standard Adapter Box
- Internal can diameter 46
- Bearing quality