GONFLAGE
- Check that the valve knob is closed, i.e. in the up position (press it to check).
- Connect the pump to the kayak, starting with the bottom, which must not exceed 0.25 bar (10 PSI).
- Disconnect the pump and close the outer plug.
- Now connect the pump to one of the side tubes. WARNING: tube pressure must not exceed 0.69 bar (3.6 PSI).
- Disconnect the pump and close the outer cap.
- Repeat the operation for the second tube.
DEGONFLAGE
- Unscrew the valve cap, press the deflation button and turn the valve clockwise 1/4 turn until it locks
- Release the valve and the air will automatically escape. If you wish to stop deflation, press the deflation button and turn it counter-clockwise 1/4 turn.
- To store your kayak in its bag, start folding on the side opposite the valve, by the molded tip.
KAYAK AND PACK DIMENSIONS
Inflated kayak dimensions:
- Length: 400cm
- Width: 100 cm
- Inside width: 46 cm
- Weight: 15.9 kg
Folded kayak bag dimensions:
- Height: 88 cm
- Width: 45 cm
- Depth: 25 cm.
PACK CONTENTS
- Inflatable kayak KOLOA 400
- 3 adjustable molded seats
- High-pressure manual pump
- Carry bag.
- Removable fin
- Repair kit includes glue, PVC fabric and valve wrench.
CARE INSTRUCTIONS
- Rinse your kayak with clean water after each use.
- Remember to reduce the pressure on your boat during prolonged exposure to the sun.
RESTRICTIONS
Do not inflate the kayak to more than 10 PSI. Do not walk or lean on the board on the ground with the fin attached, to avoid damaging or cracking the fin and housing.
MAIN TIUSSU
PVC 1100 DTEX fabric, DROPSTITCH bottom.
CARRYING BAGS
- Heavy-duty Ripstop fabric
- Padded handles and shoulder straps
- Reinforced mesh pocket and drain.