Second floor
DIN connection (max 4 350 PSI / 300 bar)
Diaphragm compensation with T-mechanism (constant performance whatever the depth and residual pressure of the cylinder)
"Auto-Closure Device" (ACD) system: automatic closure of the 1st stage to prevent water ingress during rinsing (internal lubrication preserved)
Dry chamber protecting moving parts from the cold.
Removable stainless steel seat.
Flow rate at 200 bar: 1500 L/min.
Second floor (suite)
T-body with 2 HP outlets (7/16") and 4 MP outlets (3/8"), perfectly oriented for rational hose positioning.
Forged brass body with multi-layer chrome plating.
Weight: 525 g
Second floor
Pneumatic balancing mechanism for smooth, easy breathing.
Venturi shutter (ergonomic design for easy handling, even when wearing gloves).
Heat exchanger for resistance to icing
Work of Breathing (WOB) Medium 0.85 joule/liter
Soft, robust Comfo-Bite mouthpiece that reduces jaw fatigue thanks to its unique palate bridge.
Lip covers
Hose length: 730 mm
Weight: 200 g
Octopus
Pneumatic balancing mechanism for gentle, easy breathing.
Venturi shutter (ergonomic design for easy handling, even when wearing gloves).
Heat exchanger for resistance to icing
Weight: 186 g
Hose length (yellow): 1000 mm
Average breathing effort: 0.85 joule/liter
Soft, robust Comfo-Bite mouthpiece reduces jaw fatigue thanks to its unique palate bridge
Luminescent yellow front cover for improved visibility.
Maintenance
Make sure the dust cap is securely in place.
Soak the regulator in a basin filled with fresh water.
DANGER: If you are using a garden hose, do not use a pressurized jet to clean the 2nd stage. The pressure of the jet could damage the membrane and/or the internal valve.
Wipe the regulator dry.
Do not expose your regulator to direct sunlight for long periods.
Storage
Store your regulator in a clean, dry place, away from light and at a moderate temperature.
Do not store it near a source of heat, or in a room likely to contain chemical vapors such as chlorine or ozone (e.g. pool equipment room).
Never store your regulator mounted on a cylinder
DANGER: Never use solvents or hydrocarbon-based cleaning products to clean or lubricate your regulator. Never use aerosol cans.
Revision and control
AquaLung requires that your regulator be serviced at least once every two years, and visually inspected at least once a year.
Both examinations must be carried out by an authorized workshop Aqualung
Depending on the number of dives and conditions of use, your regulator will need to be serviced more frequently.
