Setting
To adjust the paddle, open the latch, pull the handle to the desired size and close the latch. The alignment rail ensures that the handle is aligned with the blade axis.
If the paddle is not sufficiently tightened with the latch open, retighten the metal screw.
The paddle is adjusted approximately 15-20 cm above the head:
Ex: a 1.90 m person adjusts to approximately 2.10 m
Ex: a 1.50 m person adjusts to approximately 1.70 m
Dismantling
To dismantle the paddle, press the "push pin" on the back of the tube and pull on each part to dismantle it.
Dismantling the paddle allows it to be stored in the sup bag, or put in the boot of a car.
The size of the dismantled paddle is 89 cm.
Adhesion
For a better grip on the tube, apply a little wax to the handle.
Technical dimensions
Max usage size: 220 cm
Min usage size: 170 cm
Dismantled size: 89 cm
Weight: 960 gr
Tube diameter: 3 cm
Blade surface: 565 cm² (87 inch²)
Blade width: 18,5cm (7,3')
How to maintain your paddle
After a Stand Up Paddle session, it's important to rinse your paddle in clean water.
To prevent salt crystals from accumulating on the clamping nut, push pins and inside the tubes, rinse your paddle in hot water. This will extend the life of your paddle.
In the event of breakage or loss, blades are available in our after-sales section (Ref: 8648642).
Directions for use
The paddle is your means of transport and therefore your safety on the way back.
Never leave your paddle floating in the water, as it is not designed to float for more than a minute.
If you take a break, leave the paddle on the board, in the bungee cords.
Warranty
Warranty: 2 years
