Inflating & deflating your Stand Up Paddle
INFLATION
This SUP is equipped with a new-generation valve for even greater safety.
To inflate your SUP, open the cover and plug in the pump (IN mode).
Inflate to 17 PSI for optimum glide.
Disconnect the pump and close the outer cover
DEINFLATION
Turn the cover a quarter turn clockwise (OUT mode).
Roll starting from the opposite side of the valve to expel all air and achieve a complete fold
Close the cover.
Technical dimensions
SUP GONFLE:
Length: 14' (427 cm)
Width: 27" (69 cm)
Thickness: 6" (15 cm)
Volume: 310 liters
Weight: 12 kg (+/- 10%) - empty weight without equipment
Note: dimensions may vary slightly depending on inflation pressure.
BAG CONTAINING FOLDING SUP:
Height: 80 cm
Width: 45 cm
Thickness: 30 cm
Weight in use
This SUP has been designed and optimized for an experienced sailor weighing between 80 kg and 100 kg to provide a good compromise between speed and stability.
Stability, however, is a notion relative to the level and conditions of practice (flatwater, sea, river...). The weight is therefore indicative. Don't hesitate to ask to test the product.
For one person, the maximum recommended weight is 110 kg.
Repair
We offer a repair kit for stand-up paddles under part no. 8512384.
We recommend that you contact your local shop for repairs.
Spoiler
Plastic fin available from after-sales service and online in case of loss or breakage (ref: 8609360).
You can also upgrade your product with the SUP Race carbon fin (ref 8545438).
Accessories
Included with the board:
- a carrying bag
- a camera support on the nose
- a rolled up leash 10'
- 1 Us Box fin
- 2 repair patches
- 1 instruction manual
Paddle and pump are not included, we advise you to visit our web pages to equip yourself properly.
Warranty
Warranty: 2 years.
