Program
This high-performance 2+1 midlenght is ideal for carving in all types of waves and is ideal for powerful point-break waves up to 2m.
It holds up very well in hollow waves such as landes.
Mounted with 2 Twin fins, it will be more playful but with a little less drive in deeper waves.
Fins not supplied.
Dimensions
6'8 X 20" 3/4 X 2" 11/16
203 X 53 X 7 cm
Volume 40 L
Weight 3.7 kg without fins
Shape
Co-created with Jeremy Smith (Hendaye ) .
Outline élancé .
Caréne : spoon on the front to facilitate the take off in hollow waves, which ends in a double concave on the back Three quarters of the board for maneuverability.
Bevel-shaped bizautés rails for better entry into the water.
Construction
Laminated on a 30kg/m3 EPS core with Epoxy resin and fiberglass.
Top: 2 layers 6oz 1 layer 4oz
Bottom: 1 layer 6oz
4oz daggerboard reinforcement
5mm paulownia wood lath.
Advantages of EPS/EPOXY boards
We have chosen this type of construction for our surfboards because it offers several advantages.
Epoxy resin is more resistant to impact and denting than polyester resin.
The board will be more reactive and capable of generating more speed.
EPS (expanded polystyrene) foam floats better, so for the same volume you have more buoyancy than a polyester/polyurethane board.
Fins
Delivered without fins .
side 4" FCS1 ref/ (8751381) and central us box 7" ref/(8750883) available in store or on Decathlon.fr .
Which fin set-up to choose:
For powerful waves and a weight of more than 70 kg, the 2 +1 set-up with a central 7" and sides 4" .
For smaller waves, single or twin set-up .
Twin set-up ideal with Keel .
Packaging
The board is packed in a Flexi Hex® honeycomb case in a sturdy cardboard box.
this case can be reused in your surf bag to protect it on the move.
Warranty
2 years excluding breakage in two and impact.
