Directions for use
1/ Set up on flat, solid ground
2/ Check that the hose is attached to the INFLATE side
3/ Connect the hose to the boat
4/ Turn the orange ring to position 1
5/ Inflate the boat until it becomes hard (approx. 8 PSI)
6/ Turn the orange ring to position 2
7/ Finish inflating to the recommended pressure.
Pump supplied with 2 gaskets on the inflation nozzle to fit most valves on the market. (orange:ITIWIT/ black: other)
Storage tips
Use the fixing clip so that the hose and pump become one.
Do not step on the pump or hose.
Clean away sand and salt, which can damage the seals.
Technical dimensions
Height: 47 cm
Width: 30 cm
Hose length: 90cm
A 60 mm diameter piston for easy pressure build-up. Easy inflation for all sizes.
Pump weight: 1.3 kg
Supplied with a multi-tip set
In addition to its basic nozzle for high-pressure SUP and KAYAK drop stitch inflation, the pump comes with:
A "mini boston" nozzle for inflating kayak seats
A "boston" nozzle for inflating low-pressure kayaks, inflatable mattresses and tents.
An adapter and nozzle for inflating certain kite surfing wings.