BRANCHEMENT
Works when plugged into your vehicle's 12 V cigarette-lighter socket, engine on (13.8 Volt)
5-meter extension lead.
Compatible with minimum 10-amp fuses.
Provides pressure up to 20 PSI (1.37 bar).
SECURITY ALERT
If you forget to switch on the vehicle's engine, or if the cigarette lighter socket is not properly plugged in, your pump will automatically go on alert and shut down to prevent damage to the vehicle's fuse.
GONFLAGE
- Connect the pump to the cigarette lighter, car engine on,
- Connect the pump hose to the tent,
- Choose the pressure unit: psi/bar,
- Set the recommended pressure with the +/- buttons,
- Start inflation by pressing the POWER logo,
The pump stops automatically at the set pressure.
Target pressure adjustment from 0.1 PSI (0.01 Bar) up to 20 PSI (1.37 BAR)
One volume cycle up to 0.4 PSI then one pressure cycle up to 20 PSI
DEGONFLAGE
- Connect the pump to the cigarette lighter,
- Connect your hose to the pump's "DEFLATE" outlet and connect it to your tent's valve,
- Choose the pressure unit : psi/bar,
- Press the (-) button until "DEFLATE" appears on the display,
- Start deflation by pressing the "POWER" logo,
- To stop it, press "POWER" or wait for the 120-second cycle to end.
DIMENSIONS
Length: 28.5 cm
Width: 19 cm
Height: 9 cm
Pump weight: 1.6 Kg
Extension weight: 315 g
Total weight: 1.9 Kg
Supplied with a multi-tip set
In addition to its "boston" nozzle for inflating inflatable tents, mattresses and low-pressure kayaks, the pump comes with:
- 1 x 5 m extension cable for easy inflation on your campsite
- A basic high-pressure SUP and KAYAK drop stitch nozzle
- A mini boston nozzle for inflating kayak seats
- An adapter and nozzle for inflating certain kitesurfing wings
