Directions for use
1/ Set up on flat, solid ground
2/ Check that the hose is attached to the INFLATE side
3/ Connect the hose to the boat
4/ Turn the orange ring to position 1
5/ Inflate the boat until it becomes hard (approx. 8 PSI)
6/ Turn the orange ring to position 2
7/ Finish inflating to the recommended pressure.
Pump supplied with 2 gaskets on the inflation nozzle to fit most valves on the market. (orange:ITIWIT/ black: other)
Storage tips
Use the 2 clips to secure the hose and pump as one.
Do not step on the pump or hose.
Clean away sand, which can damage the seals.
Technical dimensions
Height: 60 cm
Width: 27 cm
Depth: 12 cm
Hose length: 100 cm
A 60-diameter piston mm for easy pressure build-up. Easy inflation for all sizes.
Pump weight: 1.2 kg
Volume of air delivered:
Mode 1: 2.1 liters
Mode 2: 1.2 liters
Supplied with a multi-tip set
In addition to its basic nozzle for high-pressure SUP and KAYAK drop stitch inflation, the pump comes with:
A "mini boston" nozzle for inflating kayak seats
A "boston" nozzle for inflating low-pressure kayaks, inflatable mattresses and tents.
An adapter and nozzle for inflating certain kite surfing wings.
Repair
We make our products as repairable as possible. Here are the after-sales parts available for this pump:
Handle + Manometer: 8810939
Aluminium tube: 8810947
Hose: 8810949
Warranty
Availability of spare parts essential for use: 10 years
Warranty: 2 years