How to patch a bicycle inner tube
1/ Locate the hole on the inner tube.
2/ Rub the surface that will receive the patch with the sandpaper supplied.
3/ Degrease, clean and dry the surface.
4/ Spread the glue evenly around the hole.
5/ Wait about 1 min, until the glue is no longer shiny.
6/ Position the patch in the middle of the hole (without touching the glue and the sticky surface of the patch with your fingers) and press firmly for at least 1 min.
7/ Remove the transparent film from the patch.
Pro tip
Check that there are no foreign bodies in the tire before refitting the inner tube.
For best results, adapt the size and shape of the patch to the size of the puncture.
Product details :
4 round patches diameter 19 mm
2 round patches diameter 25 mm
2 rectangular patches 18 mm x 28 mm
1 scraper
The tube of dissolving glue needed to apply these patches and repair your punctures (Part no. 8545180) is sold separately.
Conservation :
Patches:
Optimum shelf life: 5 years at room temperature (16-22°C, 30-70% humidity), protected from direct light, in its packaging.
Minimum temperature for repair: +10°C
Operating temperature: -40°C to +65°C
