KEMPER

2-burner gas camping stove - portable and foldable

169.90
3x Pay in 3x with
Payment in 3 instalments is possible from a basket value of CHF 50 and requires the approval of our partner CembraPay. You will be able to choose this payment method, as well as consult the General Terms and Conditions and the applicable fees when finalizing your order.
Ref. : 8879403

Designed for campers who want a 2-burner stove that's easy to use, compact, foldable and portable, to enjoy a good barbecue when hiking/camping.

A stable 2-burner gas stove, easy to use with its piezo ignition and easy to transport thanks to its compact design. Stainless steel top for durability and easy cleaning

In-store collection

All about

PRODUCT BENEFITS

Power

2x 2300 W. Boiling time 1 L water: ~ 4min30. Weight: 2.2kg.

Autonomy

Approx. 2h30 at full power with 450g butane gas cartridge.

Compatibility

Valve cartridge. Compatible with 450g gas cartridges, part no. 8775079

Ease of use

PIEZO automatic ignition. Very stable.

Easy maintenance

Easy maintenance: stainless steel

TECHNICAL INFORMATION

Technical specifications

Boiling time for 1 liter: 4min30
- Weight 2.2 kg
- Dimensions: 22 (width) x 52 (length) x 7 cm (height)

Setting up the stove and connecting a gas cartridge :

When installing a gas cartridge, always operate in a well-ventilated area, preferably outdoors, and never in the presence of flames, heat sources, sparks, people or flammable materials.
Check that the gas inlet to your stove is properly closed, and that the gasket is present and in good condition.
Make sure the cartridge is on a stable horizontal surface. Do not shake it.

Setting up the stove and connecting a gas cartridge (continued) :

Hold the device and screw in the cartridge by hand, turning it clockwise as far as it will go, taking care not to damage the thread.
Follow the same instructions when dismantling the cartridge.
It may be dangerous to use cartridges other than Decathlon brand ones.
It is normal for a small "pchit" (escaping gas) of less than 2 seconds to occur when connecting the cartridge to the stove.

Installation and operation.

Place the stove on a flat, unobstructed surface. Release the controller stored under the stove and screw the cable end onto the cartridge, thus placing it connected at a distance from the stove. Open the flow control tap, engage the piezo (several times if necessary). Your stove is now lit.
The flow control knob allows you to fine-tune the stove's output, so you can heat quickly or simmer for long minutes.

Safety in use

Do not use your stove in an enclosed space.
Always cook under adult supervision, and be careful around children.
Do not tilt the canister while the stove is in operation, as this may create large flames.

Easy to store and transport

Once you've finished cooking, let your stove cool down. Unscrew the cartridge and replace the controller in its housing under the stove, passing the hose over the burner (the elastic metal sheath protects against residual heat).
Rotate the latch to hold the controller and protect the nozzle.
Store the product in its box for transport.

Performance and consumption

Numerous parameters influence the capacity and performance of your stove: atmospheric pressure, wind and humidity... and can therefore vary boiling temperature, heating time and the number of liters heated per cartridge.
The performance of a stove is therefore determined by the ratio of gas consumed to heating speed.

Warranty

2 years

COMPOSITIONS / ADVICE

STOCK TIPS

Avoid contact with moisture. Do not leave in the rain. After use or cleaning, store your stove in a dry place, taking care to unscrew the cartridge.

Restrictions

Do not leave outside in the rain

TESTS

In order to meet your requirements, our products are tested on camping sites, in the conditions you may encounter during your hikes and camping evenings.
Our teams and a panel of testers (partners, ambassadors and customers) put our products through their paces in real-life conditions.

USER REVIEWS