Program
A board that performs well in waves from 80 cm to 2 m (hip height to head height) with power. Its squash tail will get you through the softer sections. If you're a shortboarder, this is your basic quiver board.
Construction
made of laminated Epoxy resin for greater strength.
30 kg/m3 EPS foam loaf.
Top: 3 layers of fiberglass (6oz, 6oz and 4oz)
Bottom: 2 layers of fiberglass (6oz and 4oz) on back, 1 layer (6oz) on front
Rails: 2 layers of fiberglass (6oz and 4oz) + reinforcement patch on back.
Tail: 2 layers of fiberglass (6oz and 4oz) + reinforcement patch in Innegra.
Dimensions
6'1 X 20" X 2"5
(cm ) 185,4 X 50,8 X 6,3
Volume:33 L
Weight: 3,1 kg +/- 100 gr without fins
Shape
Co-created by Olaian Ambassadors.
Tail: squash for easy board pivoting.
Double concave under the rear foot and single concave under the front foot for a good compromise between grip and rail-to-rail transition.
FCS2 fin assembly and disassembly
1) make sure the small side screws are unscrewed.
2) clip the front of the aileron into the notch at the front of the housing
3) press the rear of the aileron into place
4) to secure the assembly, you can tighten the small screws with an FCS-type wrench
for disassembly
WARNING: after unscrewing the small screws
you will need to force the aileron from the rear to the front to unclip it. Protect your hand to avoid injury from the edge.
Protective packaging
The board is packed in a Flexi Hex® honeycomb case in a sturdy cardboard box.
this case can be reused in your surf bag to protect it on the move.
How to behave in the water.
https://www.olaian.fr/conseils/les-regles-de-priorites-en-surf-tp_4603
Retrouvez les règles de bonne conduite à l'eau sur notre site Olaian.fr
Warranty
2 years excluding breakage in 2 , tearing of cases , shocks and notches .
