Experience
The Atomic Redster X5 ski is designed for the advanced skier looking for a sporty piste ski. Its titanium wood construction makes it a stable, safe and high-performance ski for all low- to high-speed slopes.
Its progressive radius means you can choose the perfect ski for all low- to high-speed slopes, and from small to large turns, depending on the size you choose.
Construction
Power Woodcore: Woodcore construction, vertical sidewalls along the entire length of the ski for better grip, densolite core. Titanium stabilizer and structured topsheet for long life.
Fasteners
Bindings brand Atomic, model FT10 GW.
Din 3 to 10.
GripWalk compatible.
Accepts ski boots with sole lengths from 257mm to 380mm.
Solidity
Structured topsheet for greater resistance.
Preparation
Skis waxed and sharpened, ready to use. Edge sharpened to 89°.
Dimension lines
119.5/70.5/103.5
The sidecut corresponds to the width in mm of the tip, runner and tail.
The wider the tip, the easier the ski enters the turn.
The narrower the runner, the faster the edge-to-edge transition.
The wider the runner, the more comfortable and stable the ski is in snow changes.
Radius = 14m
As for the curve radius, the smaller it is, the shorter the ski will turn (small turn)
The larger the curve radius, the larger the turn the ski will make.
What is a camber?
When a ski is placed on the ground, the points of contact between the ski and the snow are located near the tip and tail, while the center of the ski (under the bindings) rises slightly. This is camber. The longer and higher the camber, the more grippy and responsive the ski. The lower the camber, the more forgiving and maneuverable the ski.
What is a rocker?
On a rocker ski, the tip and sometimes the tail lift off the ground earlier than on a cambered ski, shifting the contact points towards the center of the ski. The ski's surface in contact with the snow is shortened, offering maneuverability and lift in soft snow. With the angled rocker, you gain edge length for more grip on hard snow. The longer the rocker, the more maneuverable your ski.
Our après-ski tips
After a good day's skiing, here's what you need to do to ensure your skis last a long time:
- Wipe down your edges at the end of the day to prevent rust.
- Use self-gripping straps between your skis to prevent the soles from rubbing against each other.
- Store your skis in a dry place protected from the sun.
Payment in 3 instalments is possible from a basket value of CHF 50 and requires the approval of our partner CembraPay. You will be able to choose this method of payment, and consult the terms and conditions and applicable fees when finalizing your order.
