EXPERIENCE
The Atomic Redster Q 4 ski is designed for advanced skiers looking for a lightweight, reassuring piste ski that's easy to control in all snow conditions.
Inspired by racing but suitable for all snow conditions, the Q 4 is the ultimate all-round piste ski for progress and pleasure.
COAST LINE
123/76/107 169CM
The sidecut corresponds to the width in mm of the tip, runner and tail.
The wider the tip, the easier the ski enters the turn.
The narrower the runner, the faster the edge-to-edge transition.
The wider the runner, the more comfortable and stable the ski is in snow changes.
Radius= 15.3 m
As for the curve radius, the smaller it is, the shorter the ski will turn (small turn)
The larger the curve radius, the larger the ski will turn in large turns
CONSTRUCTION
Dura cap sidewall structure,
wood core + densolite
titanium stabilizer
structured topsheet
Directional shape
FIXINGS
Binding brand Atomic, model M10 GW.
Grip Walk compatible.
Din 3 to 10.
Accepts ski boots with sole lengths from 257mm to 380mm.
SOLIDITY
Metal tip cap to protect the tip.
Topsheet for long-lasting durability.
PREPARATION
Skis waxed and sharpened, ready to use. Edge sharpened to 89°.
WHAT IS A CAMBER?
When a ski is placed on the ground, the points of contact between the ski and the snow are located near the tip and tail, while the center of the ski (under the bindings) rises slightly. This is camber. The longer and higher the camber, the more grippy and responsive the ski. The lower the camber, the more forgiving and maneuverable the ski.
WHAT IS A ROCKER?
On a rocker ski, the tip and sometimes the tail lift off the ground earlier than on a cambered ski, shifting the contact points towards the center of the ski. The ski's surface in contact with the snow is shortened, offering maneuverability and lift in soft snow. With the angled rocker, you gain edge length for more grip on hard snow. The longer the rocker, the more maneuverable your ski.
OUR APRÈS-SKI TIPS
After a good day's skiing, here's what you need to do to ensure your skis last a long time:
* Wipe down your edges at the end of the day to prevent rust.
* Use self-adhesive straps between your skis to prevent the soles from rubbing against each other.
* Store your skis in a dry place protected from the sun.