Experience
Performance piste ski. Its wood construction
titanium and its Revoshosk Carbon give a stable, responsive and high-performance ski.
It's perfect for having fun and carving
curves all day long. With its multi-radius ribs, you can choose the size of your favorite turns.
Construction
Straight edge, integral wood core, Titanium stabilizer, REVOSHOCK CARBON
Sandwich structure Wood core + titanium full length
Straight edges textured coating, world cup finish sole
Fasteners
Binding brand Atomic, model M 12 GW.
Grip Walk compatible.
Din 3 to 10.
Accepts ski boots with sole lengths from 257mm to 380mm.
Solidity
Metal spatula tip to protect the spatula
Preparation
Skis waxed and sharpened, ready to use. Edge sharpened to 89°.
Dimension lines
111.5/70/100
The sidecut corresponds to the width in mm of the tip, runner and tail.
The wider the tip, the easier the ski enters the turn.
The narrower the runner, the faster the transition from edge to edge.
The wider the runner, the more comfortable and stable the ski is in snow changes.
Radius= 14.4 m
As for curve radius, the smaller it is, the shorter the ski will turn (small turn)
The larger the curve radius, the larger the ski will turn in large turns.
What is a camber?
When a ski is placed on the ground, the points of contact between the ski and the snow are located near the tip and tail, while the center of the ski (under the bindings) rises slightly. This is camber. The longer and higher the camber, the more grippy and responsive the ski. The lower the camber, the more forgiving and maneuverable the ski.
What is a rocker?
On a rocker ski, the tip and sometimes the tail lift off the ground earlier than on a cambered ski, shifting the contact points towards the center of the ski. The ski's surface in contact with the snow is shortened, offering maneuverability and lift in soft snow. With the angled rocker, you gain edge length for more grip on hard snow. The longer the rocker, the more maneuverable your ski.
OUR APRÈS-SKI TIPS
After a good day's skiing, here's what you need to do to ensure your skis last a long time:
- Wipe down your edges at the end of the day to prevent rust.
- Use self-gripping straps between your skis to prevent the soles from rubbing against each other.
- Store your skis in a dry place protected from the sun.