Inflating & deflating your Stand Up Paddle
INFLATION
To inflate your SUP, check that the valve is in the up (closed) position, so that no air escapes.
Plug in the pump.
Inflate to 17 PSI: the pressure at which the board is most stable and glides best
Unplug the pump and close the outer cap.
DEINFLATION
To deflate your SUP, press the valve firmly, and the air will escape on its own.
Roll away from the valve to expel all the air and achieve a compact fold.
Aileron and aileron base
Available in after-sales service and on the Internet in case of loss or breakage.
SUP fin part number: 8403374
Remember to remove the fin whenever you are not on the water.
Rinse the fin base if possible before and after use.
Start folding at the base of the fin, respecting the dotted lines to avoid damaging the base.
Recommended user weight Maximum load
For optimum use of the product, the maximum recommended weight in use is 140 Kg.
The maximum load of the stand-up paddle is 320 Kg.
Maintenance key
NEVER UNSCREW THE INFLATED SUP VALVE! RISK OF INJURY.
If the valve is leaking and the SUP is deflated, use the supplied wrench to turn the valve a quarter turn.
If necessary, the valve can be replaced. Please consult your local store Decathlon.
Technical dimensions
SUP GONFLE:
Length: 13' (396 cm)
Width: 31" (79 cm)
Thickness: 6" (15 cm)
Volume: 335 liters
Weight: 12 kg (+/- 10%)
BAG CONTAINING SUP FOLD:
Height: 90 cm
Width: 46 cm
Thickness: 24 cm
Repair
We offer a repair kit for stand-up paddles under part no. 8512384.
We recommend that you contact your local shop for repairs.
80% of your board can be repaired.
BAG contents
Board
Fin
Leash
Notice
Repair patch
Valve wrench ( use SUP deflated)
Directions for use
We advise you to practice with a buoyancy aid vest (part no. 8387600) or a buoyancy aid belt (part no. 8600104)
Do not leave your board inflated in the heat or sun when you are not on the water.
Warranty
Warranty: 2 years
Spare parts availability: 10 years