Technical dimensions
Inflated board:
Length: 10' (305cm)
Width: 35" (90 cm)
Thickness: 6" (15 cm)
Volume: 325 liters
Weight: 9,5 kg (+/- 10%)
BAG CONTAINING FOLDED SUP:
Height: 103 cm
Width: 35 cm
Thickness: 22 cm
These dimensions leave enough room for the pump and paddle (not included).
What is the recommended user weight and maximum load on the board?
Poids utilisateur recommandé :
Moins de 60 kg : planche ultra stable.
Entre 60 et 80 kg : planche très stable.
Plus de 80 kg : planche idéale pour débuter facilement la pratique.
S'UTILISE A PLUSIEURS : 1 adulte 2 enfants ou 2 adultes ( assis / debout)
Charge maximale pour rester hors de l'eau : < 325Kg.
How to inflate and deflate a stand-up paddle?
INFLATION:
Check that the orange valve button is in the up (closed) position, by pressing it.
Connect the pump.
Inflate to 15 PSI.
The more the SUP is inflated, the more stable it is and the better the glide.
Disconnect the pump and close the outer cap.
UNINFLATION:
Press firmly on the orange valve button to let the air escape.
Don't put your face in front of the valve and pull away.
To fold, start opposite the valve to expel all the air.
How do I store my board and where can I leave it to dry?
Do not expose your board to direct sunlight outside the water.
If your board must remain in the sun, we recommend keeping it away from all sources of heat (facades, floors, car roofs, etc.) and reducing the pressure to 10 PSI to avoid overpressure and irreversible damage (explosions, delamination, leaks, etc.).
Aileron and aileron base
Available from after-sales service and on the Internet in the event of loss or breakage.
SUP fin part number: 8403374
Remember to remove the fin whenever you are not on the water.
Rinse the fin base before and after use if possible.
Start folding at the base of the fin, respecting the dotted lines to avoid damaging the base.
Maintenance key
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY.
In the event of a leak in the valve, deflate the SUP and, using the supplied wrench, screw in the valve by a quarter turn.
If necessary, the valve can be replaced. Please consult your local Decathlon workshop.
How do I repair my stand-up paddle?
We offer a stand-up paddle repair kit under part no. 8512384 to repair small, easily visible leaks.
For all other repairs, we recommend you contact your local store.
We can repair fin bases, handles, valves and larger leaks.
Leash
NEW lightweight LEASH for greater comfort.
Always wear your leash to stay connected to your boat in the event of a fall. It attaches to the ankle and cannot be used in surf or river.
Remove and rinse it after each use.
Store it in the bag pocket to protect your PAD when folding.
What's in the bag?
Board L: 10'
Fin
Leash light
Notice
Repair cloth (glue not included)
Valve wrench (use deflated SUP)
What to do with the wrench in the SUP bag?
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY.
In the event of a leak in the valve, deflate the SUP and, using the supplied wrench, screw in the valve by a quarter turn.
If necessary, the valve can be replaced. Please consult your local Decathlon workshop.
Directions for use
We advise you to:
Wear a buoyancy aid (reference 8552970 ) or a buoyancy aid belt (reference 8600104)
Do not exceed 300 meters from a shelter.
Do not use a leash on the river.
Tell someone on land about your outing.
Find out about any local navigation rules in your area.
SUP with your pet
Our tips can be found on our website ITIWIT :
https://www.itiwit.fr/conseils/faire-du--stand-up-paddle-avec-son-chien-tp_1734
ATTENTION:
It's best to protect your board with a towel.
What kind of construction?
Dropstitch Light knit 0.65 mm single layer with stringer for lightness and rigidity in practice.
Warranty
2-year warranty.
Spare parts availability: 10 years
