Assembly
Torque: 5 Nm(± 1 Nm)
2 M5 x 8 A4 convex socket head cap screws with thread lock
2 M5 A4 SCHNORR washers
Green thread lock to be added on the thread pitch and in the threaded hole.
Help wanted
The technicians in your Decathlon shop are on hand to help you change the parts on your bike. Don't hesitate to ask!
To install the new nosepiece that can support the pannier, you'll need..:
Nose support: 8750333
Nose reflector: 8757202
2 screws Iso 7380 torx M5X10 with threadlocker and 2 lock washers DIN25201 stainless A2 (not supplied)
I want to replace the 8524992 light kit on my tilt folding bike with the version on current folding bikes. (1/4)
The original light kit of the old folding bikes will be replaced by a front light and brackets, a rear light and a nosepiece that can support a piece of luggage.
I want to replace the 8524992 light kit on my tilt folding bike with the version on current folding bikes. (2/4)
If I want to install the new usb rechargeable front light I need:
The stem top cap: 8819793
The front light + its support: 8757414
The computer stem + cover V2: 8757187
A CHC screw M6 x 16mm class 8.8 A4 with threadlocker and 1 washer DIN 912 M6 A4 (not supplied).
I want to replace the 8524992 light kit on my tilt folding bike with the version on current folding bikes. (3/4)
In addition, you can replace the original nose with the new nose that can support the pannier. To do this, you'll need:
Nose support: 8750333
Nose reflector: 8757202
2 Iso 7380 torx M5X10 screws with threadlocker and 2 DIN25201 stainless A2 lock washers (not supplied)
I want to replace the 8524992 light kit on my tilt folding bike with the version on current folding bikes. (4/4)
If you want to replace the rear light with the new usb rechargeable one, you will need the following code:
Rear light 8757417
Frame cover 8819778
