Tent assembly and dismantling
This tent is a classic dome tent.
Simply install the poles with the chamber, then attach the rain fly.
To dismantle, simply reverse the procedure.
In windy conditions, we recommend using the guy ropes supplied with the tent.
Mattress compatibility
Tent recommended with self-inflating mattresses or trekking mattresses up to 65 cm wide.
We do not recommend the use of inflatable mattresses thicker than 8 cm in this tent.
This greatly reduces the volume inside the tent and encourages condensation inside.
Tent ventilation
The tent is equipped with 1 top vent, 2 side vents and 1 interior door with mesh on the top to allow air to circulate and be renewed between the bedroom and the flysheet, and to limit the natural phenomenon of condensation.
Waterproofing the tent
All our tents are validated in the laboratory and in the field to guarantee waterproofing.
To do this, we place the entire tent under a shower that releases 200 liters of water per hour for 3 hours.
The rain fly is made of 2000mm Schmerber PU-coated polyester, the ground sheet of 120 g/m² polyethylene, and all seams are sealed with heat-bonded strips.
Wind resistance
We test all our tents in a wind tunnel on a turntable to expose each side. A properly erected tent, with all guy wires properly deployed around the tent, should remain habitable in a wind speed measured at 35 km/h close to the ground (Force 5).
What's in my product?
- 1 chamber
- 1 waterproof raincoat
- 2 hoops
- 12 sardines
- 4 shrouds
- 1 cover
Warranty for your tent
This camping tent has been designed for occasional outdoor use (4 weeks a year) on camping trips or in the wilderness.
Continuous exposure to UV rays for several weeks can damage the fabric.
Our tents do not fall into the "garden furniture" category and are not designed for permanent outdoor use.
To ensure the longest possible life for your tent, it is important to store it when not in use.
3-year warranty.
Don't throw it away, fix it!
Our tents are your companions on camping trips.
As tents age with use, certain parts can wear out or break.
To make repairs easier, we make each part (poles, rainfly, chamber, etc.) accessible to you and make it easy to replace.
Don't throw away, repair!
Product design: our expertise
Our global design center Quechua is based in Passy, at the foot of Mont-Blanc in Haute Savoie.
This location makes it a real meeting place between our teams (designers, product managers, engineers...) and campers.
A great asset for designing quality products and bringing you all our expertise.
Where do our tents come from?
Created in our international design center at the foot of Mont Blanc in France, these tents are then manufactured and assembled by our suppliers in China, Vietnam and Bangladesh.
These are partners with real expertise in the manufacture of our tents, with whom we work closely.
This relationship of trust with our industrial partners enables us to create high-quality technical products.
Warranty
3 YEARS.
REPAIRABILITY: All our tents can be repaired in your Decathlon workshop.
Payment in 3 instalments is possible from a basket value of CHF 50 and requires the approval of our partner CembraPay. You will be able to choose this method of payment, and consult the terms and conditions and applicable fees when finalizing your order.
