DIMENSIONS AND MODULARITY
The pitch is made up of:
- 2 cages 2.5M * 0.8M
- 4 rectangular side areas, 2 of which are prisons
- 2 side lines with markings of 2 metres in red, 5 metres in yellow and middle in black: each line being divided into 3 parts of 7.5 m, 5 m and 7.5m respectively.
- 8 ballast bags.
Dimensions unfolded: 21.5M x 10M or 16.5M x10M
Dimensions useful for the game: 20M x 10M or 15M x 10M
Dimensions folded (suitcase) : L 95cm * W 53cm * H 42 cm
Tube diameter: 12 cm
DIMENSIONS AND MODULARITY
Our water polo field may also be suitable for a swimming club or local authority wishing to set up a temporary bathing area.
Our design allows the goals to be removed, leaving only the outer edges. It will still be possible to assemble the components thanks to the straps + buckles system. This reduces the internal dimensions to a maximum of 20M long by 7.5M wide.
ASSEMBLY
UNFOLDING
Unfold each component from the ground onto a flat surface.
Inflate each component to a pressure of 7 PSI (0.48 bar) using the pump supplied, and assemble according to instructions.
INNOVATIVE BALLASTING
The water polo field is fixed either with ropes or with an innovative ballast system.
To ensure effective ballasting, fill the bags with stones or sand up to the limit, to reach an approximate weight of 15kg.
Each bag is then inflated to swim to the field. This makes it easier to set up around the terrain. When the weights are in place, deflate them to let them sink to the bottom.
DISMANTLING
Remove the ballast bags from the field, then disassemble the components.
Move each component to a flat surface, unscrew the top valve cap completely, then partially unscrew the valve base and allow the air to escape for about 1 minute.
ATTENTION: a very loud noise will be heard if the valve base is unscrewed too quickly.
RESISTANCE
For its inflatable components, our terrain is composed of a TPU bladder surrounded by a Tarpaulin sheath (a blend of several layers of PVC and textile).
The latter ensures the product's resistance to external aggression while maintaining the shape of the various parts.
REPAIR
Our water polo field has been designed to allow repair by the customer. If a leak is detected on a component, simply open the 2 zips and remove the bladder to locate the leak.
We supply a repair kit containing self-adhesive patches, several replacement valves and a 23 m rope to remove each bladder from its sheath. Video instructions explain how to remove the bladders from the sheaths.
Payment in 3 instalments is possible from a basket value of CHF 50 and requires the approval of our partner CembraPay. You will be able to choose this method of payment, and consult the terms and conditions and applicable fees when finalizing your order.
