THE RCR RANGE
The RCR range will delight all cyclists looking for a complete bike without compromise. Performance has been the priority on this bike. Each tube section has been calculated to be as efficient as possible in the main wind angles ( -15°/+15° ).
This bike falls into the aero-light category, where an optimal balance of lightness, stiffness and aerodynamics has been found to make it an exceptional bike.
If you're looking for a bike that can win on any terrain, the RCR is it!
WHAT IS THE DIFFERENCE BETWEEN RCR AND RCR PRO?
What makes a carbon frame is its geometry, shape and layup. Layup is the assembly of carbon fibers. Not all fibers have the same properties.
On the RCR frame we only use high modulus fibers. On the RCR PRO we have chosen exceptional fibers, which reinforce the rigidity of the frame in the most stressed areas while saving a little weight.
The RCR pro is ready to ride at the highest level.
ZOOM ON THE FRAME
The RCR frame weighs 830 g painted in size M
The RCR pro frame weighs 790 g painted in size M
The RCR fork weighs 380 g painted in size M
The frame accepts a maximum tire section of 33 mm .
Weights may vary according to color (+/- 50g)
WARNING: Carbon frames must not be clamped to the top tube, seat tube and down tube using a clamp (workshop stand, bike rack). Carbon is a very rigid material, but it does not withstand compression.
A CHOICE OF FINISHES
Depending on the groupset and wheel configurations, we offer a range of finishes that will enable you to choose and ride the model of your choice.
RCR and Pro frames are offered in a Carbon brut finish with a matte varnish. This means the carbon fibers are visible, as they are not covered by paint. Each frame is unique, since the 450 parts are draped by hand in the mold, saving up to 100g over and above the technical aspect.
THE COCKPIT
Integration of the seeds in the steering allows the RCR to have a fluid cockpit while keeping maintenance easy.
DEDA x VAN RYSEL Superbox EVO , the stem has been lightened while retaining good rigidity
XS : 80 mm
S : 90 mm
M: 100 mm
L : 110 mm
XL : 120 mm
DEDA SUPERZERO RS (carbon) handlebars
Deda measurements are taken at the ends (e.g. a 400mm handlebar measured between axes = a 420mm announced by Deda)
Width between axes:
XS/S : 400 mm
M/L : 420 mm
XL: 440 mm
GROUP SRAM FORCE AND POWER SENSOR QUARQ
CE RCR is equipped with the complete SRAM FORCE ETAP AXS groupset and the QUARQ power sensor. The power sensor is a must-have for cyclists looking to progress by planning their training.
Total weight of drivetrain: 2920 g with power sensor
The electric groupset has two separate batteries (one for each derailleur). You can use the SRAM connect application to set up your bike and retrieve data from your outings.
TRANSMISSION SRAM FORCE
Shifter: FORCE ETAP AXS D2
Front derailleur: FORCE ETAP AXS D2
Rear derailleur: FORCE ETAP AXS D2 MAX 36T
Cassette: FORCE XG 1270 D1 10-33
Crankset: FORCE D2 DUB PM 48/35T
Crank length depending on size
XS: 165
S: 170 mm
M: 172,5 mm
L/XL: 175 mm
FORCE chain SRAM
The SRAM elements are easily replaceable and compatible between the FORCE and RIVAL ranges.
TRANSMISSION MAINTENANCE
We would like to draw your attention to the need for regular maintenance of your transmission, especially if you ride in difficult conditions (wet and/or dirty roads)
Regular maintenance will ensure that your transmission lasts longer.
Regular chain checks are essential with this tool:
https://www.decathlon.fr/p/testeur-d-usure-chaine-velo/_/R-p-120530?mc=8351086
TRANSMISSION LIFETIME
When buying a bike, it's important to take the cost of maintenance into account when choosing the drivetrain.
The values below are average values, given as an indication, and will vary greatly depending on maintenance.
The average life of a well-maintained chain is 5,000 km
The average life of a cassette is 10,000-12,000 km
A poorly maintained chain can cause chain jumping and damage to the frame.
DISC BRAKES
SRAM FORCE disc brakes with 160 mm front and 140 mm rear discs.
SRAM FORCE disc brakes are hydraulic, so braking is more progressive and powerful than with hydromechanical brakes.
A running-in period is required. Simply make a series of 20 progressive brake applications at low speed (20 km/h), then a second series at 30 km/h. Both brakes need to be run-in.
Running-in improves adhesion between pad and disc.
HYDRAULIC BRAKE MAINTENANCE
Hydraulic brakes operate via a closed circuit between your brake lever and your caliper.
The system is sealed by a hose.
Over time, a normal loss of pressure in your hoses will occur, resulting in a loss of braking efficiency. When your brake is too soft, or when you come to a stop on your handlebars, you need to bleed your system. This operation requires special tools and know-how.
WARNING AND ADJUSTMENT
CAUTION: never brake without a wheel, as this can cause the brake pads to stick.
If your disc is touching, proceed as follows to realign the wheel and caliper:
- Loosen the brake caliper
- Brake hard and retighten the brake caliper at the same time
- If the problem persists, go to the store.
ZIPP 404 FIRECREST WHEELS
ZIPP's 404 wheel evolves for even greater performance. 100% carbon wheel without tubeless ready hooks.
The profile height is 58mm like the previous version, but the new ZR1 hubs offer greater fluidity and less friction in freewheeling zones.
Internal width 23 mm , it will support 28 mm tires very well.
Pressure between 3 and 5 bars maximum.
Pair weight 1470g.
TIRE CONTINENTAL GP 5000 S TR
Ride faster, more comfortably and with even greater puncture resistance with continental GP5000 S
700x28C tubeless ready tires: pressure between 4.00 and 6.50 Bar
280g
TUBELESS OR INNER TUBE
We recommend that you use the tubeless valve supplied with your bike to convert your tires to tubeless.
Tubeless tires provide greater comfort, better performance and allow the tire to repair itself in the event of small pinches.
Of course, an inner tube is always a must in your repair kit in the event of a puncture with a large hole in the tire.
POSITION
RCR carbon seat post -15mm
FIZIK ARGO VENTO R5 saddle or FIZIK ANTARES R5 saddle depending on version.
These racing saddles, developed in partnership with professional racers, feature a short nose to promote stability and relieve pressure on the soft tissue area.
Weight: 225g ( 140 mm )
PEDALS
Supplied without pedal
WHICH SIZE TO CHOOSE?
You should refer to the bike's geometry chart.
If you're between two sizes, a shorter bike will be better suited to cyclists looking for a more responsive, edgier bike. On the other hand, if you're looking for a more composed bike for long-distance riding, the larger size may be the better choice.
IMPORTANT / SAFETY
ZIPP wheels are "hookless", i.e. there are no hooks to hold the tire in the rim.
It's the pressure that holds the tire to the rim.
The maximum pressure recommended by ZIPP must be respected; under no circumstances should it exceed 5 bars, otherwise the tire may come off the rim.
