A 3-in-1 concept for every situation
With the "3in1" system, the jacket is ideal in cold conditions (down to 0°C), but also in warm weather, as you can leave the inner layer at home and take only the rain jacket with you.
You can also use the inner fleece alone, as a mid-layer, over a tee-shirt.
With just one jacket, you have 3 options!
Waterproof jacket components
The impermeability of a fabric, ensured by a coating or membrane, is measured in Schmerber or mm H²0 (pressure exerted by a column of water). The higher the number, the more waterproof the fabric.
How is the thermal resistance of my jacket tested?
The jacket has undergone a thermal resistance test that measures the amount of heat lost between the body and the outside environment. The less heat lost, the more the product retains body heat and protects against the cold outside. We placed the jacket on thermal dummies that reproduce body heat and perspiration. These are placed in thermal chambers that go down to -40°C.
Up to what temperature will I be protected?
The 3in1 SH100 jacket has been validated at a temperature of 0°C. This means it will guarantee climatic comfort down to this temperature, if you wear the fleece combined with the waterproof jacket.
How is my jacket tested for waterproofness?
The test is carried out in 3 stages:
- First, we check the quality of the waterproofing strips applied to the entire jacket.
- Next, the jacket is put under an artificial shower for 3 hours, with a flow of 100 L/h of water.
- Under the jacket, a dummy is covered with an absorbent fabric, which indicates by darkening zones whether the dummy is wet, and therefore whether the product is waterproof or not.
This jacket is waterproof
The waterproofness of a jacket is not limited to its components: the way the different parts are assembled is also a criterion for evaluation.
Whether thermally bonded or sewn and then waterproofed, the overall waterproofness of your jacket is measured using a shower test developed by Decathlon, which simulates rainfall of varying intensity.
For example, the SH100 3in1 waterproof jacket protects you from a downpour, i.e. 12 cm of rain in 2 hours.
Which size to choose?
This jacket is designed to be worn over a layer 2 (fleece, sweater). So choose your usual size for the best fit. The cut is mid-length, i.e. the jacket reaches the middle of the buttocks. The waist can be adjusted by means of snap fasteners. The hood can be adjusted with a drawstring around the face. The depth of the hood can be adjusted using a tab with hook-and-loop fastener on the back of the head.
Weight
XS : 1.058 kg
S : 1.122 kg
M : 1.128 kg
L : 1.206 kg
XL : 1.242 kg
2XL : 1.358 kg
