COMPONENT IMPERMEABILITY
We measure a fabric's resistance to water pressure expressed in mm water column (test based on JIS 1092 standard). The higher the pressure, the more waterproof the fabric. This garment has been validated in a shower test under 60 l of water / m² / hour for 1 hour. This test reproduces the average conditions of a mountain shower.
A component with a waterproof rating of 5,000 mm can withstand the pressure exerted by 5,000 mm of water (roughly equivalent to a 1-hour shower).
COMPONENT BREATHABILITY
The breathability of a component is measured by its "Thermal Evaporative Resistance" (TER).
This is its capacity to let the water vapor produced by the body during effort escape to the outside, thus avoiding the accumulation of water on the skin.
The lower the TER value, the more breathable the fabric.
RET ≤ 6: highly breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: fabric with low breathability
PRACTICAL DETAILS
Can be stored in its own pocket. Central zipped opening, hood, elasticated cuffs and waistband.
MAINTENANCE
1/ Machine wash (30 to 40°C): hook-and-loop fasteners and zips closed, mild detergent. Jackets and pants inside out. Remember to loosen straps and elastic parts.
2/ Avoid folding garments too much in the machine: risk of damage.
3/ Don't mix garment styles or colors.
4/ Don't use bleach or fabric softener.
5/ Select a thorough rinse and gentle spin.
6/ Tumble dry or line dry (minimum temperature & time).
WHERE DO OUR JACKETS COME FROM?
Created in our international design center at the foot of Mont Blanc, in France, the jacket is then made by our suppliers in Vietnam.
These are partners who possess real know-how in the manufacture of our jackets, and with whom we work closely.
This relationship of trust with our industrial partners enables us to create high-quality technical products.
Weight
2-3 Years / 89-95 cm : 0.112 kg
3-4 Years / 96-102 cm : 0.118 kg
4-5 Years / 103-112 cm : 0.128 kg
5-6 Years / 113-122 cm : 0.136 kg
